95_1500 Posted May 23, 2010 Author Report Posted May 23, 2010 Well I had to melt the plastic welds that hold the outer skin to the door skeleton cuz the resin stuck to the furry shit so badly Gonna brace and glass the hell out the the bottom so it doesnt warp when I glass the whole thing. Hoping to get everything ready to be glassed by friday and do both doors and the console at the same time. Work in 8 hrs... no time for the truck anymore really sucks lmao Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
BeachJoshua Posted May 23, 2010 Report Posted May 23, 2010 IDK if anyone mentioned this but that screams steal me... hope you pitch black your side windows and start putting up that aluminum foil sun blocker where ever you park. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
95_1500 Posted May 23, 2010 Author Report Posted May 23, 2010 Assuming you mean the woofers in plain view, or even the console? I dont leave my truck unattended for 12 hours in a deserted parking lot, if I do its at work which im well within range of my 2 way alarm. Otherwise its parked in the garage at night. I live in a small town and almost everyone knows my truck and that I have beat and have for 5 years. Its been 2 years since Ive had 15's in the window and nobody has made any attempt to do anything. Its physically impossible to get the subs out through the window opening unless the box is slid back. I have glass break and tilt sensors that work better than effectively. Side windows tinted enough that you cannot see in without your nose on the window no matter what the outside lighting is. All camper windows are 5%... Whats the use of doing work like this that you (or at least I and 98% of the members on this forum) take great pride in if you're too scared to show it off. Use your head, dont do stupid shit, drive a different vehicle if you're going to a sketchy part of town and will be parked for long period of time. Park under lights / in public areas if not able to be in the driveway. If they want it bad enough, they will get it. If every time you park you're worried about getting jacked, Id recommend taking up a less expensive / loud hobby. The day I let the thought of "it will get stolen" overcome "this is what I enjoy and love" is the day the haters get the best of me, and ill be damned if ill let some lowlife get the better half of me. Objects can be replaced, my love for what I do will always exist, and I have no problem doing it all over again, bigger, better, louder than the previous. Stolen system is an excuse to upgrade IMHO Oh yeah, state farm full coverage plus interior content ftw.. Back on topic, its hot as shit today and I just got off work about an hour ago. Gonna eat and then try to get some work done, updates later Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted May 23, 2010 Report Posted May 23, 2010 Assuming you mean the woofers in plain view, or even the console? I dont leave my truck unattended for 12 hours in a deserted parking lot, if I do its at work which im well within range of my 2 way alarm. Otherwise its parked in the garage at night. I live in a small town and almost everyone knows my truck and that I have beat and have for 5 years. Its been 2 years since Ive had 15's in the window and nobody has made any attempt to do anything. Its physically impossible to get the subs out through the window opening unless the box is slid back. I have glass break and tilt sensors that work better than effectively. Side windows tinted enough that you cannot see in without your nose on the window no matter what the outside lighting is. All camper windows are 5%... Whats the use of doing work like this that you (or at least I and 98% of the members on this forum) take great pride in if you're too scared to show it off. Use your head, dont do stupid shit, drive a different vehicle if you're going to a sketchy part of town and will be parked for long period of time. Park under lights / in public areas if not able to be in the driveway. If they want it bad enough, they will get it. If every time you park you're worried about getting jacked, Id recommend taking up a less expensive / loud hobby. The day I let the thought of "it will get stolen" overcome "this is what I enjoy and love" is the day the haters get the best of me, and ill be damned if ill let some lowlife get the better half of me. Objects can be replaced, my love for what I do will always exist, and I have no problem doing it all over again, bigger, better, louder than the previous. Stolen system is an excuse to upgrade IMHO Oh yeah, state farm full coverage plus interior content ftw.. Back on topic, its hot as shit today and I just got off work about an hour ago. Gonna eat and then try to get some work done, updates later exactly, my thoughts to the "T"! liking what is going on with the console mayne. actually holding off on the door panels again, saving up since polk audio now has 8" mid drivers. want to incorporate those in the front doors as well. cant wait to see what is going into your redesigned doors and you are always one step....or 10 ahead of me homie. do you know how many times I sat in that drivers seat and thought about where to mount the window controls....lol. want them out of my doors bad!!! I like where you put them. I dont think I am going to move them all. just the drivers door buttons. the rest I will delete because, well, dont want anyone else controlling my windows anyways...lol good to see you going at it again. looking great bro! 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
95_1500 Posted May 23, 2010 Author Report Posted May 23, 2010 exactly, my thoughts to the "T"! liking what is going on with the console mayne. actually holding off on the door panels again, saving up since polk audio now has 8" mid drivers. want to incorporate those in the front doors as well. cant wait to see what is going into your redesigned doors and you are always one step....or 10 ahead of me homie. do you know how many times I sat in that drivers seat and thought about where to mount the window controls....lol. want them out of my doors bad!!! I like where you put them. I dont think I am going to move them all. just the drivers door buttons. the rest I will delete because, well, dont want anyone else controlling my windows anyways...lol good to see you going at it again. looking great bro! thanks mayne! yeah i only get about 10 hours a week tops to work on it. Working 60 hours a week blows lmao. yeah I wanted to get rid of the passenger controls but if they arent plugged in the driver switch doesnt control the passenger window. Didnt want it just chilling somewhere lol im ready to see what youre plannin with those 8s Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted May 26, 2010 Author Report Posted May 26, 2010 My order got here a day earlier than estimated shipping, Darvex rocks. Wire for extending the door controls 200 feet of 18ga (black, red, blue, white) 100 feet of 16ga (black, red) Might take off tomorrow morning to work on it, if not my next night off is Friday.. Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
98crewcab Posted May 27, 2010 Report Posted May 27, 2010 ARE YOU SHITTIN ME!?! thats alot of wire. and I have 4 doors to move them....lol. and was playing around with it today....i think I just need to make a jumper for the pin connector then I can disconnect the switch to the passenger doors, and then control it all from the drivers door only. so, any hints on the changes with the doors....you can tell me, I can keep a secret....lol 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk!
95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 ARE YOU SHITTIN ME!?! thats alot of wire. and I have 4 doors to move them....lol. and was playing around with it today....i think I just need to make a jumper for the pin connector then I can disconnect the switch to the passenger doors, and then control it all from the drivers door only. so, any hints on the changes with the doors....you can tell me, I can keep a secret....lol Yeah man I got 58 solder connections to make when the time comes. What you see on the doors is what I got man... I havent had ANY time to work on it. Also guy at work quit today so I get to work friday night also. I get saturday before 3 then sunday/monday after 3 to work on it. Im actually gluing the countersink rings to the speaker rings right now lmao. Yeah a jumper would probably work for that... You made any progress? Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
95_1500 Posted May 27, 2010 Author Report Posted May 27, 2010 Like I said got the rings glued on... Waiting on laundry so I cant go to sleep yet anyway.. gonna be passin out at work again tomorrow lmao Tomorrow ill see if my buddy has a 45 degree chamfer bit I can borrow this weekend. Use a piece of plywood to sit on the saw horses for a router table lmao Original Build http://www.stevemeadedesigns.com/board/index.php?showtopic=24095
killallblue Posted May 27, 2010 Report Posted May 27, 2010 i wanna move my swithes but i dont know what to put were the blanks spot is on the door side note like the build
Recommended Posts
Archived
This topic is now archived and is closed to further replies.