Sub Box For 4 12 Inch Kicker Cvr's

[Toxiccasper]

Well I designed this box for 4 12 inch kicker CVRs for the rear on an explorer. I just wanted to get your guys input on the design and make sure everything is right. The box has (2) 4.45622 cf chambers, 2 subs per chamber. Each chamber is tuned to 32 hz with a port slot port 16.375 inches wide by 2 inches in height and 6.43 inches long. So I used a calc to calc out the port and it told me with a slot port that that is the right length so I was just wondering if someone could double check it for me thanks

Edited July 7, 2008 by Toxiccasper

[Toxiccasper]

Anyone?

[Boon]

If you can fit it I would be more inclined to increase the port area and make the port longer to keep the tuning the same.

Also consider bringing the tuning up to more 38-40ish, it'll be a lot louder to the ear and probably better suited to those subs.

[Toxiccasper]

Thanks but that tuning was right wasnt it? because its different lengths depending if its a slot port or not and I assume that is because it uses the sides of the box for the sides of the port