T-line Box Design For 1 Rfz3408

[Toxiccasper]

Well after I read the little tut on how to build a T-line I thought I would give it a try. So after following everything I came up with a T-line tuned to about 38hz. With a constant 32 sq inches of port through out. So tell me what you guys think.

[Toxiccasper]

Any comments?

[EricM9104]

45 EVERY corner or you WILL lose output.

[Toxiccasper]

Ya I noticed that after i uploaded the pictures lol

[BigPimpin91]

I didn't like my T-Line tuned to 38hz.

Tune it lower if you can.

It lost all loudness after 45hz.

It was still there but not with the authority it had between 47-60hz.

[Toxiccasper]

Ok yeah I wasnt sure, because I was going to tune it to 34hz because the FS of the subwoofer Im going to use is 34 so I probably tune it down to 34

[Toxiccasper]

More pictures I will update pictures once I retune and add 45s to the corners

What do you guys think of the subwoofer I made. I made it the the exact measurements of the Rockford Fosgate Punch Z 8 inch subwoofer Im going to use for this box

[BigPimpin91]

Nice job making the sub.

How did you do that?

[Toxiccasper]

lots of measuring the actual sub woofer and making circles lol its pretty close to the real one lol

[01xtreme]

looks good. like said earlier, 45 the corners of the port, and you should be good.