Addition Of A Trunk

[Brick2560]

I havent heard much of AudioQue, is it any good?

I'm looking to try to stay within the 2000 RMS range, but can lower depending on the sub(s). I just had a thought about DC subs too. so right now I'm looking at either an 18" or 15" BTL, maybe a DC Lvl 4, Idk yet, I'll e-mail good ol' Rusty. And as for the amp, still up for discussion. Also, so I should save around 600ish for the batt. and alt?

[stitch12]

I've looked at the AQ amps a lot lately and really haven't come across anything bad. Here is the link to the aq2200d

[Brick2560]

to run it at 1 Ohm, would I have to get a dual 2, or a dual 1 ohm sub?

(Ohm is still something I dont fully understand)

[Brick2560]

51"x51" is way exagerated

I have a 98 Dodge Intrepid, almost identicle car/trunk

Trunk IS deep, I can lay down in it, BUT- Useable space where you can actually slide a box in and out is different

where you would put the box is more likely in the little tunnel area behind the seats which is I think 39"wx14tx18 deep BUILT IN

If you go with a box about 38x13x16, you can slide the box in thru the seats, but if you fiberglass the box, you will have alot more room

The trunk just LOOKS HUGE

What do you mean I could slide it in through the seats? like take out the arm rest and console/little door that opens into the trunk?

Also, with a box around 7 cubes, how much port area should I use?

Edited July 29, 2008 by Brick2560

[trappin859]

to run it at 1 Ohm, would I have to get a dual 2, or a dual 1 ohm sub?

(Ohm is still something I dont fully understand)

For one sub, D2. For two subs, D1. I'm not sure beyond that though lol.