Hifonics Bxi2608d

[truck_buster23]

Well when I hook it up I will just play around with it and see how it sounds when adjusting it.

Edited September 19, 2008 by truck_buster23

[E a r t h]

do what was stated above, wire each coil to a set of terminals on the amp and you will be at a 1ohm load. That should be well over 2000wrms to it, i know its rated for 2600. SS filter should be set to control cone movement under tuning, so I would start at 5hz below tuning of box and fine tune as needed from there. Be careful, thats alot of power to that sub.

[truck_buster23]

do what was stated above, wire each coil to a set of terminals on the amp and you will be at a 1ohm load. That should be well over 2000wrms to it, i know its rated for 2600. SS filter should be set to control cone movement under tuning, so I would start at 5hz below tuning of box and fine tune as needed from there. Be careful, thats alot of power to that sub.

Thanks man I think the sub will be fine it's 2600 rms and 4800 peak