byron2817 Posted September 19, 2008 Report Posted September 19, 2008 i heard ppl saying that they have there mids cross at 100hertz to 3000hz.i want to know how they make them stop at 3000hz and not play higher notes NEED TO GET LOUDER!!!
Kicker Guy Posted September 19, 2008 Report Posted September 19, 2008 Well you could do it the easy way and get a 3sixty or something like that.... but if you are talking passive, then you need a coil and a capacitor. Depending on what dB a you want and what hertz you want will determine what coil and cap you may use. To figure out what you would need go here. http://www.the12volt.com/caraudio/crosscalc2.asp#nbpc Head Unit: Pioneer DEH-P6000UB Sub Amp:American Bass VFL 500.1 Subs: 4 Fi BL 18's Enclosure:21.5 Cubic foot flat wall tuned to 40 hz Batteries: 3 Kinetik 2400's in the back, Kinetik 1200 under hood. Mids & Highs: 4 Kicker DS 6.5 coax in doors, 2 Kicker DS coax in pillars Highs Amp: Kicker kx250.2, kx100.2 Wire: 4 Runs 1/0 gauge Knukonceptz
Recommended Posts
Archived
This topic is now archived and is closed to further replies.