My Tahoe REBUILD...New RF amps 21,000+ watts RMS (PICS) 2nd RF 3sixty.2 in!

[dmz2711]

wiring them to parellel will give you 0.7 and series will give him 1.4. some RE subs don't give you a 2, 4 or 8 ohm load

are you sure??? :-[ if he has dual .7's for each sub, and he wires them in parallel he would get .35ohms/sub.... if he series wires them it would be 1.4ohms/sub...if he has dual 1.4's, and if he paralleled them it would be .7ohms/sub, and series them it would be 2.8ohms/sub....

[meade916]

by changing coils ;)

[meade916]

Yesterday was a "add a second 3Sixty.2, ziptie it all up" day but i had nothing but bad luck....anything that could go wrong did. (see my engine noise post in "headunit" section) Its always been there slightly but i did something that made it worse.....Anyway i got the noise to where its tolerable (the way it originally was) until i come up with a better plan but didnt get too many zipties on.  I also blew a few tweeters god knows when but just noticed last nite so when i replace them ill clean the wires up the rest of the way.  For now here is how it looks...

 

 

 

a little cleaner but since im very burnt out and havent relaxed at all this will do for now. A 21,000+watt system is kinda hard to hide completely   

Well if you try you can hide it pretty good.. 

[D3r3k]

thats so amazing its like u tell somone ya 21,000 watts, there like Where???? lol amazing man, sucks about the tweets and noise

[meade916]

thanks man......just one of those hurdles when you have so much crap i guess.  Ill be good to go in a few days on the tweets and the noise is coming from the deck im almost positive of it so ill have to come up with a strong plan B.  I wonder if using the Digital out on the Avic N1 will cure the noise problem. hmmm gotta look into that

[dmz2711]

by changing coils ;)

How you gonna change coils?? recone kit?? anyway.. the tahoe looks great man!!! i cannot wait to see some numbers for that monster, keep doin your thing man

[irupp33]

very clean and well hidden. Do you think having your amps in tight spaces like that has any effect on them heating up?

[D3r3k]

by changing coils ;)

i think thats the only way to change the coils, unless u got leaf springs dumb joke FTW!!!How you gonna change coils?? recone kit?? anyway.. the tahoe looks great man!!! i cannot wait to see some numbers for that monster, keep doin your thing man

[AP Zoutes]

Hav you tried replacing the ground on the deck to try to get rid of the noise? Also on rca's I've used electrical tape to wrap up where they connect to get rid of noise.

[meade916]

its fixed....a crappy seat belt bolt is the only place i found that got rid of the noise...hhaha i ran a new power, ground and some  new RCA's but in the end i just moved the ground for the 2 3sixtys to a seatbelt bolt near by and dammit it worked!Truck is starting to feel complete now.....hammering hard as HELL.  Now i can start thinking about the honda again real soon  :^