marquettefan247 Posted September 30, 2008 Report Share Posted September 30, 2008 well I cant build a ported box because i need some trunk space so if someone can hook me up with some plans that would be great here are some specs of the subs http://www.autoaccessorystore.com/home_n.a...ail&id=1659 and my trunk forget what i said bout my thoughts that was earlier. build it so I still have some trunk space minimze as much as possible. Maybe ductape can help gain Quote 1995 Ford Mustang 3.8l V6 5 Speed Plans: 2 12 inch dc Level 4s DC 2.0k Amp KCA 1/0 Power Amplifier Installation Kit 220 Amp Alt XS Power 12V D925 AGM Battery Stinger Volt Gauge Rockford Fosgate RCAs Box built from birch. Probably tuned to 32 Hz 0 gauge wiring for extra battery Dynamat “I think everyone should go to college and get a degree and then spend six months as a bartender and six months as a cabdriver. Then they would really be educated.” Al McGuire “The only mystery in life is why the kamikaze pilots wore helmets” Al McGuire remember this always Close only counts in horseshoes and hand grenades Link to comment Share on other sites More sharing options...
marquettefan247 Posted September 30, 2008 Author Report Share Posted September 30, 2008 bump Quote 1995 Ford Mustang 3.8l V6 5 Speed Plans: 2 12 inch dc Level 4s DC 2.0k Amp KCA 1/0 Power Amplifier Installation Kit 220 Amp Alt XS Power 12V D925 AGM Battery Stinger Volt Gauge Rockford Fosgate RCAs Box built from birch. Probably tuned to 32 Hz 0 gauge wiring for extra battery Dynamat “I think everyone should go to college and get a degree and then spend six months as a bartender and six months as a cabdriver. Then they would really be educated.” Al McGuire “The only mystery in life is why the kamikaze pilots wore helmets” Al McGuire remember this always Close only counts in horseshoes and hand grenades Link to comment Share on other sites More sharing options...
marquettefan247 Posted October 1, 2008 Author Report Share Posted October 1, 2008 wow no help whatever Quote 1995 Ford Mustang 3.8l V6 5 Speed Plans: 2 12 inch dc Level 4s DC 2.0k Amp KCA 1/0 Power Amplifier Installation Kit 220 Amp Alt XS Power 12V D925 AGM Battery Stinger Volt Gauge Rockford Fosgate RCAs Box built from birch. Probably tuned to 32 Hz 0 gauge wiring for extra battery Dynamat “I think everyone should go to college and get a degree and then spend six months as a bartender and six months as a cabdriver. Then they would really be educated.” Al McGuire “The only mystery in life is why the kamikaze pilots wore helmets” Al McGuire remember this always Close only counts in horseshoes and hand grenades Link to comment Share on other sites More sharing options...
lunari Posted October 5, 2008 Report Share Posted October 5, 2008 (edited) I'm no expert but... I'll run it through BassBoxPro and post the optimal enclosure (according to it). I'll post one for higher output, and if you want one for a flatter frequency response. Here it is: It's 1" MDF with a double baffle making the front be 2" thick, sealed boxes need to be as strong as possible, also be sure to use glue along with the screws during assembly and to run either some silicon or extra glue along all the seams on the inside to stop the possibilities of air escaping. Also be sure to seal very well around where the wire exits so there isn't an air leak there either. Edited October 5, 2008 by lunari Quote Getting loud on a budget. Impossible? We shall see! 95 Chevy Blazer Pioneer DEH-6700MP RF T10001BD AA Havoc 18" ?? Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.