David Posted June 13, 2006 Report Share Posted June 13, 2006 Well its time to Start my Build. woo hoo. This will be my 2nd spl build ever, so Im kind of a rook/noob (whatever you call the new guy) to spl, So go easy on me Vehicle- 1994 Chevy Astro Van ext. ( she isnt pretty but she will be) http://i40.photobucket.com/albums/e202/Sac...ng/100_1128.jpg System spec's ( that I know for sure) Head Unit JVC <-- nothin special at this time it will change later on> SoundStream Exact 6.3 mid's with Alpine Type R tweeters Alpine MRV-F540 (mids-highs) 2) SoundStream SPLX 154's quad 1ohm's No sub Amp @ this moment. 2- runs of 1/0 for power 2- runs of 1/0 for ground( I still need this) Big 3 ( I have all of this ready to go) High-output alternator ( came allready in the van) phoenix gold fused distro-block phoenix gold Battery terminal 2 walmart Batteries Enclosure ported Wall. currently its sitting in the van @ 25.5 cubes it has no front baffle or rear panels yet ( I ran out of screws) top and sides are doubled up 3/4 mdf and single layer on the bottom. I will be doing custom lower door panels so that I can mount this mids & highs in the doors instead of installing them in the stock dash pockets. I made the base of the wall bigger than what I needed so I can test it before I decide on actuall volume, I will be making 2 ports one for burp and one for BassRace. On to the pics. Box more to come when meade gives me more time off from working on the Site LMAO Link to comment Share on other sites More sharing options...
David Posted June 14, 2006 Author Report Share Posted June 14, 2006 ok well I had some more time to work on the van today, so I decided to cut my seal panels. these panels will help me seal off the wall. long ways to go yet stay tuned Link to comment Share on other sites More sharing options...
meatwhistle Posted June 14, 2006 Report Share Posted June 14, 2006 nice work! Chris Hansen refers to me as the one that got awayhttp://www.internetisseriousbusiness.com/ Link to comment Share on other sites More sharing options...
David Posted June 14, 2006 Author Report Share Posted June 14, 2006 nice work!ty But seeing how I really need to get snappin on this Bitch, I decided to do some more. So I drew up the front panel ( 1 layer for today) and let the jiggy rip. so here are some pics of what I did Testing ma Holes 2 screws holdin the baffle in so I can see what it looks like with subz in pic from the rear of the enclosure so I need to cut my 2nd layer of the baffle for the front, figure out how I wanna do the port add the rear baffle and seal the fugger up nice and tight. there is a 2x even comming up on the 24th of this month I would like to have it atleast playing for this show she dont have to be all perty yet just playing, so I can get some points. more to come.............. Link to comment Share on other sites More sharing options...
David Posted June 15, 2006 Author Report Share Posted June 15, 2006 bump for pics Link to comment Share on other sites More sharing options...
David Posted June 15, 2006 Author Report Share Posted June 15, 2006 ok so I worked on this beast untill 1:30 am last nite got the front double baffle all glued and screwed together, ports are installed. so here is a couple of pics more to come later D Link to comment Share on other sites More sharing options...
FieroGrande Posted June 15, 2006 Report Share Posted June 15, 2006 NICE WORK BRO. more pics are very welcomed. Link to comment Share on other sites More sharing options...
David Posted June 15, 2006 Author Report Share Posted June 15, 2006 NICE WORK BRO. more pics are very welcomed.ty and your wish is my command ;D the wall is getting pretty close to being done, I was going to resin the whole inside but I dont think I will @ this time, this is just to finish the season up, next yr we will do something out of control. ( when the funds are better ) more to come later today Link to comment Share on other sites More sharing options...
David Posted June 15, 2006 Author Report Share Posted June 15, 2006 almost done. need some bracing and seal it up and its done Link to comment Share on other sites More sharing options...
David Posted June 16, 2006 Author Report Share Posted June 16, 2006 how about a few more pics. I ran out of carpet so the other panels will have to wait untill my next payday. I think it looks pretty good, I have never carpeted before so Im pleased with the outcome. David Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.