Jump to content
Second Skin Audio

Recommended Posts

Posted
Hey Basshead69, I tried to research these subs a little bit last night, but couldn't find much. Even the ones I did find were listed as 4 ohm dual voice coils... which wouldn't work for me, but you say yours are 2 ohm dvc's ? Do they make these same subs in a 2 ohm dvc 15" ?

Any place you could suggest to find more info on these subs, plus possibly buy ?

Oh, and one more thing; Obviously your into the SPL aspect (which is cool... so am I to a certain degree) but how would you rate these subs in the SQ department ?

Thanks,

Fish

I believe they do. You would have to call Bob at American Bass. www.americanbassusa.com. He is usually the one that answers the phone too. In a proper sq box, I think they will sound really good.

TeamSundown-3.jpg
Posted

Nice box but eek, isolate those amps from the box! The vibration will snap the legs off the FETs otherwise :o

Some nice numbers too, especially considering the low tuning :D

goodgrammarbc7.gif

10.x volts fo' life!

Posted

THE VFLs are BEASTSSS!!

2006 F-150

4 DC XL M2 18's Walled Daily Driver

XS Power

4 DC 3.5kw

Team DC

Team S.P.L.

Lot of Audio Technix and 1/0

DC Audio Dealer

American Bass Dealer

XS Power Dealer

Audio Technix Dealer

DWRIGHT-1-1.jpg

Posted

on my box what i did for the amps is i got some rubber bushings off of some old shocks and mounted them between the amp and the box as a "suspension" so to speak works great..

SMDMafia-amazinblazin.jpg

1997 Dodge Ram Van 2500

Big III addition with 1/0 awg wiring all throughout

Lightning Audio Strike S4.1000.1D

Jenson XA2250

2 - 12" Mtx Jackhammers JH55

3ft cubed box sealed under the rear bench seat

Pioneer DEH-P6000UB head unit

MB Quart FWA 160 components up front

Posted

I was able to gain 2 tenths by going up to 52 hz. I did a 146 sealed on the dash today during testing. I may try some box positioning before the competition tomorrow. Does anybody have any other suggestions or ideas?

TeamSundown-3.jpg
Posted (edited)

drop the back seats and try to move it closer to the front of the car. i've seen some tilt the box up in the back so the woofers kinda face upwards at an angle.

Edited by philip
Posted
drop the back seats and try to move it closer to the front of the car. i've seen some tilt the box up in the back so the woofers kinda face upwards at an angle.

My seats were dropped when I did this. I will try to move the box closer to the front of the car. I will have to swap my power and ground wire to do this.

TeamSundown-3.jpg
Posted

Hey fellas. I have went from a 146.0 to a 147.1 all within a day at our Competition Only event in Wilmington NC today and this is sealed, on the dash. This is also with a 3 ohm impedance rise in which my 1500 watt rms amps are only doing about 734 a piece. I hope I remember what all I did so I can hopefully improve on the 13th show. Derrick824 can build some serious enclosures guys. I think we can get even more out of this setup with some more testing and tuning.

TeamSundown-3.jpg
  • 4 weeks later...
Posted

Gained a tenth at a local competition new number is 147.2 sealed on the dash. I have to have people hold my back door and glass and someone sit on the front of my suv to keep the flex down. I think I can get more out of this box. I haven't tried strapping the amplifiers yet. Definitely want to try strapping and see what I can get.

TeamSundown-3.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 835 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...