Ok I Came Up With This

[97maxima]

how much space between the mouth and the side of you truck??? id fire the port back just keep everything the same measurements

[chewie]

put the subs up against the back seat and have the port at the rear either facing up by the hatch or facing directly at the hatch..

i did two 12 boxes with ports on the sides and they were flops

[97maxima]

am i the only one here who thinks the port exiting the side is a bad idea???

ive done it in a suv before with good results, there is worse ways to face it. but yea sub-up, port back

[scfaust]

my last box i tryed subs up port back didnt sound good sounded the best with subs front port up or port front subs up i was told to put port faceing pass. side because i dont have but maybe 1 inch from box to back door but i have 5-7 inch from side to box

[chewie]

i vote subs up port up... keep it simple..

[scfaust]

i want sub up port u no i talk to on ca.com thought it was good ideal sub up port up it is im goin to try to come up with somethang else

[97maxima]

well if you built a little diff you could turn the box to see what works best, but in all you will only net a little over 3 cubes per sub, you might be wasting your time.

[scfaust]

ok what about 41wide x 17.5h x 17.5l port 15.5 x 2.5 x 8.8 ill try to get drawn up will that work 7cu ft at 34 hz port and subs both faceing up

[97maxima]

give me a few ill check it

[97maxima]

37hz,not enough port and 5.28 cubes net.

port height is 16 inches not 15.5 per you design

Edited February 20, 2009 by 97maxima