ben29555 Posted February 23, 2009 Report Share Posted February 23, 2009 whats the diffrence between Dual 1 and Dual 2 for the Fi Bl 18" i wanna run to 1 ohm on a BXI 1610D will that work or to much power? sorry if it has been asked before Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
RobClay Posted February 23, 2009 Report Share Posted February 23, 2009 Get a D2 if you plan on wiring it to 1ohm Quote 2 SSA Xcon 18's Sundown 2500D Pioneer 4 Stinger SPV35 batts SecondSkin Audio Damp Pro Knukonceptz Flex[/size][/b] Link to comment Share on other sites More sharing options...
c0smo kram3r Posted February 23, 2009 Report Share Posted February 23, 2009 Get dual 2Ω. Also, just in case you ever decide to match the sub with anoher, get the universal option. Quote Link to comment Share on other sites More sharing options...
ben29555 Posted February 23, 2009 Author Report Share Posted February 23, 2009 dose anyone know were i can get a pic ofd how to wire it? Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
RobClay Posted February 23, 2009 Report Share Posted February 23, 2009 (edited) And before you start choosing options take a look at this>> http://www.soundsolutionsaudio.com/forum/i...?showtopic=7154 Tells you what all the options are for and what they do. Heres how you would wire it Edited February 23, 2009 by RobClay Quote 2 SSA Xcon 18's Sundown 2500D Pioneer 4 Stinger SPV35 batts SecondSkin Audio Damp Pro Knukonceptz Flex[/size][/b] Link to comment Share on other sites More sharing options...
c0smo kram3r Posted February 23, 2009 Report Share Posted February 23, 2009 Quote Link to comment Share on other sites More sharing options...
ben29555 Posted February 23, 2009 Author Report Share Posted February 23, 2009 so on the dual 2 each voice coil is 2 ohms and runnnig them like that will give me 1 ohms correct? also with the cooling and flat wind on a daily set up i sould be able to use the BXI 1610D? Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
RobClay Posted February 23, 2009 Report Share Posted February 23, 2009 That amp probably puts out around 1400 at the most, but yes with those options it will run fine in the right enclosure. Quote 2 SSA Xcon 18's Sundown 2500D Pioneer 4 Stinger SPV35 batts SecondSkin Audio Damp Pro Knukonceptz Flex[/size][/b] Link to comment Share on other sites More sharing options...
ben29555 Posted February 23, 2009 Author Report Share Posted February 23, 2009 (edited) is their any amps that would be better for around the same price? and thanks 4 the help Edited February 23, 2009 by ben29555 Quote My Build Log loud bass songs Link to comment Share on other sites More sharing options...
eliassami5 Posted February 23, 2009 Report Share Posted February 23, 2009 (edited) Get dual 2Ω. Also, just in case you ever decide to match the sub with anoher, get the universal option. thats not what the universal option does... ficaraudio.com"We have added yet another option to the BTL and new BL series, the Universal motor option. This option allows you to fit and swap any of the coils in the specific driver series lineup into the motor. Currently all of the motors are machined specifically to maximize each coil choice. But in doing this, it doesnt allow for different coils to be swapped in and out of the same driver as the dimensions are different for each coil. Now, if you want the option to be able to switch coils and impedance, you simply select the "Universal" motor option. " Edited February 23, 2009 by eliassami5 Quote 91' Jeep Cherokee - The Heep Just Empty Every Pocket 96' Volvo 960 - The B◘x [sPL_4_U] HiFonics - Alpine Pioneer - Clarion Infinity - Kicker KnuKonceptz Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.