Recone Help

[hdc15]

i am reconing my sub. i got everthing cut out and out of the way. now i am trying to get the screws that hold the basket to the motor out but i cant get them to budge, any suggestions to get them to loosen?

[Guest]

reconing a sub just replaces the soft parts, aka the cone, dust cap, voice coil, spider system. the frame stays there and the screws should not be removed

[hdc15]

reconing a sub just replaces the soft parts, aka the cone, dust cap, voice coil, spider system. the frame stays there and the screws should not be removed

changin the size of the sub= takin of the basket and puttin new one on

[Guest]

you didnt say that now did you?

[dwright27]

reconing a sub just replaces the soft parts, aka the cone, dust cap, voice coil, spider system. the frame stays there and the screws should not be removed

unless the basket is broken.

i used a #2 phillips and not on a drill either. get the sub to hold still and use both hands and alot of force. one of my screws on my level 3 10 was a litle stripped.

the #2 should prevent this from happening.

Edited February 26, 2009 by dwright27

[hdc15]

you didnt say that now did you?

my bad, i figured that when i say "take off basket" people would assume that i am doing something else besides just a recone. but any way, any suggestions?

[hdc15]

unless the basket is broken.

i used a #2 phillips and not on a drill either. get the sub to hold still and use both hands and alot of force. one of my screws on my level 3 10 was a litle stripped.

the #2 should prevent this from happening.

thank you sir

[dwright27]

thank you sir

yw.

let me know how it goes. what kind of woofer is it?

[hdc15]

yw.

let me know how it goes. what kind of woofer is it?

its a Bl, my other one, the screws came out without too much struggle, but this one is a biotch

[Boon]

Impact screwdriver. Set that bitch on there and bash it with a hammer, couple of good taps and those screws will be begging to come out