Bigdaddy1986 Posted March 22, 2009 Report Posted March 22, 2009 I believe thats the right word. Just wired up the enclosure and as I was testing it one performed fine while the other just stood there like a bump on a log. Both are getting power tried to push in but wouldn't budge at all. Was wondering what options I have given the situation. Quote
Chris from Mi Posted March 22, 2009 Report Posted March 22, 2009 def sounds blown, but i've also seen it where the magnet shifted and pinched the coil. put a volt meter on it, and see what it says Quote Orion 2500D, Jbl Gto 75.4 Team Wolfpack Audio FSQ 15" d2, mb quart xover, tweets peerless 6.5 mids Alpine cda-105 optima up front Knu klm 1/0
Hugh G. Rection Posted March 22, 2009 Report Posted March 22, 2009 most likely a slinkied coil. Quote Owner of BigAss Ports
raytard Posted March 22, 2009 Report Posted March 22, 2009 slinky coil is when it burns off the adhesive, or parts of the coil, and it unwraps from the former, and then wedges itself inside the motor. unless its a really nice sub, throw it out and get a new one, or try and get it waranteed. Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC
Bigdaddy1986 Posted March 22, 2009 Author Report Posted March 22, 2009 slinky coil is when it burns off the adhesive, or parts of the coil, and it unwraps from the former, and then wedges itself inside the motor. unless its a really nice sub, throw it out and get a new one, or try and get it waranteed. 12w7 Quote
Bigdaddy1986 Posted March 23, 2009 Author Report Posted March 23, 2009 recone it then Anyone know anyone in or around Tampa that would be able to do it? Also thanks for the quick advice Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.