AK2013 Posted March 23, 2009 Report Posted March 23, 2009 I just installed my new sundown 1200d switching from a alpine mrp-850. Ever since i put in the new amp when i turn it up to about 30/62 volume my highs cut out when the bass hits. Does anyone know what could be the problem, voltage or something? Couldn't find anything about it with the search engine, it brang up random things that was not what i was looking for. Thanks.
CR Boom Posted March 23, 2009 Report Posted March 23, 2009 King James..FTW Check eberything again. Gain setting Groud, power etc.etc.etc. 2007 Great Wall So Cool 4-12' RE audio MX's Stetsom 7k2D 6-Batts 3-Mechman 250 amp Rhino's
AK2013 Posted March 23, 2009 Author Report Posted March 23, 2009 I haven't changed the ground or anything, it looks good. The gain is little above 1/4. All the wires are the same as they were for the other amp and I didn't have any problems so it should be my settings on the amp i'm guessing?
sri3850341 Posted March 23, 2009 Report Posted March 23, 2009 voltage at full tilt,or when problem occurs?? 07 mote carlo.. deh-p800prs hu-cdt gold 6.5's-cdt 6x9 2 ways-mcintosh mc431m(mids/highs) bxi2608,2 10w7's in 4rth order(designed by pete k)ported into cabin via armrest cutout dc power 260 amp alt-missing link module (15.4v)kicker 1/0 kit deka intimidator under hood metered 141.0 @ 32hz windows down @ kick,termlab
AK2013 Posted March 23, 2009 Author Report Posted March 23, 2009 Alright, i checked the voltage and it was in the 13s when the bass hits I dont know the exact cause the dmm i have only does full numbers no decimals thats not low enough to cause a problem is it?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.