Gotz1lung Posted June 4, 2009 Author Report Share Posted June 4, 2009 Im loading pics from my cell now, but i got alot done for the weather.. I ripped out all the old wiring, doors,dash,power,all gone. I ran the new 1/0 and started running the new Stinger 14g wire for mids/highs. Im running the dash and doors thier own feed so when the 1400.4 comes in i will already have the wires there. Nothing is running down the door sills anymore either, i always hated that but was too lazzy to do it right before now. The back of the cab got 2 layers of 3/4 mdf along with a can of foam to solid it up..its like a rock now, just to do the roof next. I hope the rain is gone tomorrow and i can do some glassin on the box..Run the other side wires too, and re-route the RCAs. My nieghbor has a belt sander so i think this box is gonna get the round over bit,sanded and painted pretty. UGLY IS LOUD, but im ugly enough for 190 deebeez so maybe the truck should look presentable. 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
Gotz1lung Posted June 4, 2009 Author Report Share Posted June 4, 2009 Final Specs ended up being: 18.5x62x18.5 17x8x13.75L port(136in^2) 10.12 gross 8.22 Net(subs and port displacement only) 37hz 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
brsteinbach Posted June 4, 2009 Report Share Posted June 4, 2009 I'm liking this build a lot. Very nice amount of port area too. (just tune way lower 28-30 ) J/K 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Gotz1lung Posted June 4, 2009 Author Report Share Posted June 4, 2009 I'm liking this build a lot. Very nice amount of port area too. (just tune way lower 28-30 ) J/K THANK YOU!!!!!!!! A comment finally..lol, i was begining to think no one cared hahaha I was going to tune lower, the last box was 35hz, but i listen to alot of older rock and the snap was just missing a little to much for my taste. I did think this one out well though "just in case". The port is 13in iside the box, right at 4in from the bottom so adding port length will be No preblemo!... More pics in a few.. damn cell phones. 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
Gotz1lung Posted June 4, 2009 Author Report Share Posted June 4, 2009 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
brsteinbach Posted June 4, 2009 Report Share Posted June 4, 2009 Its turnin out good, as soon as you get it all installed make sure you get some vids. lol. BTW is that ground sanded enough j/w but its probably just the pic though? 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Gotz1lung Posted June 4, 2009 Author Report Share Posted June 4, 2009 Its turnin out good, as soon as you get it all installed make sure you get some vids. lol. BTW is that ground sanded enough j/w but its probably just the pic though? Haha good catch, its just hand tigh in that hole, it was on the middle seat belt hole wich was good n clean..I got bussbars going in anyway for grnds. I will prolly just use a regular fused dist block on the hots, cuzz my extra batts going under the hood. 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
vexproductions Posted June 4, 2009 Report Share Posted June 4, 2009 looks good keep it up Link to comment Share on other sites More sharing options...
brsteinbach Posted June 4, 2009 Report Share Posted June 4, 2009 Haha good catch, its just hand tigh in that hole, it was on the middle seat belt hole wich was good n clean.. I got bussbars going in anyway for grnds. I will prolly just use a regular fused dist block on the hots, cuzz my extra batts going under the hood. Oh ok sounds good. 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Gotz1lung Posted June 5, 2009 Author Report Share Posted June 5, 2009 I took i think 22 pictures today so heres a few pics and the link to the Album. Im super happy with the inner port corners and the cool look the routing made toing the sub holes. http://s123.photobucket.com/albums/o317/AF.../final%20build/ 93 Chevy Silverado Crossfire,Dayton Soon to have 6 Lvl4 15s DC Audio Dealer and Team Member Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.