kryptonite Posted May 4, 2009 Report Share Posted May 4, 2009 I'm buildin a box for my buddy's tiburon and am somewhat stuck on the port dimensions. He listens to rap and heavy bass music and wants it to be a daily driver that can hit HARD The box is going to be 7.7 cu.ft. after sub displacement. My original plan was to tune the box to 29 hz with port dimensions as follows: 10" wide 4" high 11.5" long I was told that it wasn't enough port area and i'd be "choking" the sub. The box dimensions are as follows: 36" wide on the face towards the cabin 20" tall on the face towards the cabin 24.5" wide on the face towards the rear bumper 13" tall on the face towards the rear bumper Angled corners facing the rear bumper measure 13" tall by 6.5" 28" deep on the bottom Top is slanted parallel with the hatch window The sub is going to be firing into the back window and i planned on firing the port into the cabin, but that can change. PLEASE HELP!!! DC SOUND LAB NUT HUGGERCurrently Own 4 - 18" lvl 6s (m3) w/full Carbon Fiber option 2 - DC 5k lvl 4 motor lvl 2 motor On 8/2/2013 at 8:13 PM, n8ball2013 said: this is much worse. Its old n8 without the time or patience to hold fucking hands. I'm supposed to be doing school work but yet here i am making sure jr fuck fuck isn't trying to poke the other kids with a stick. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.