youngiin Posted June 8, 2009 Report Share Posted June 8, 2009 What should i do for a 2200rms syatem would the big 3 and another battery be enough? Link to comment Share on other sites More sharing options...
Dr. Johnson Posted June 8, 2009 Report Share Posted June 8, 2009 No Link to comment Share on other sites More sharing options...
amazinblazin10 Posted June 8, 2009 Report Share Posted June 8, 2009 big III biggest battery you can fit under the hood and another batter of equal size or bigger in back, and possibly a HO alt.. 2200 will require a lot of power so choose your batteries wisely 1997 Dodge Ram Van 2500 Big III addition with 1/0 awg wiring all throughout Lightning Audio Strike S4.1000.1D Jenson XA2250 2 - 12" Mtx Jackhammers JH55 3ft cubed box sealed under the rear bench seat Pioneer DEH-P6000UB head unit MB Quart FWA 160 components up front Link to comment Share on other sites More sharing options...
thacarter546 Posted June 9, 2009 Report Share Posted June 9, 2009 Big 3 with 1/0 or larger, 2 sealed deep cycle batteries as big as you can fit, 2 runs of 1/0, and IDK what car you are running, but at least a 200 amp alternator. I am running around 2kw daily and I have an odyssey pc 680 under the hood, and two pc1200s behind the driver seat, 6 runs of 2 gauge to the rear (got a whole spool for like 20 bucks while not ideal price was too good to refuse.) Aluminum buss bars in the rear, and a 200 amp alternator. Big 3 done in 2/0. My amps are not very efficient, I get very minor dimming, and I drop to around 13.2 volts during hits. With electrical you can never go too big. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.