Forget building a new box-- something is wrong I need Help

[shainemcconnell]

if you want to see 2200 watts at 2 ohms set the amp output to about 66.33 VAC and at .5 ohms set the output to about 33.16 VAC.

WITH a DMM that is about as good as you can do...impedence changes in the sub sometimes it may be lower sometimes higher...

[P4killer_]

if you want to see 2200 watts at 2 ohms set the amp output to about 66.33 VAC and at .5 ohms set the output to about 33.16 VAC.

WITH a DMM that is about as good as you can do...impedence changes in the sub sometimes it may be lower sometimes higher...

I dont know how to set the gains with my dmm a tut would nice ummm as far as box design, it my first box its not good, it wangs hahaha but in terms of craftmanship and as far as home built boxes go its a lil rough so for the ratio bit-- yea well i was cramming as much air space as possible, all ratio(s) ignored. and umm its hard to describe the rattle, the note hits and its a high pitched buzz like berrrrr instead of bummm lol i guess thtll have to do. its not like a distortion sound or a mechanical limit being reached. i didnt see any torn spider(s). I mean like i said before something happened.. it was loud eevrything sounded supurb considering and now its like theres tht stupid w/e it is again... obvi untill my issues are resolved no wangin' down the block for me !!!! i could take a vid using a dig cam but i doubt the mic would pick up the bass all tht well

Edited June 30, 2009 by P4killer_