Tooshort064 Posted July 18, 2009 Report Share Posted July 18, 2009 Well Waz Sup Everyone ? Anyway's I have a brief question for anyone who might want to answer! I will be purchasing 2 FI BTL 12's Fully Loaded In The Next Few Week's How Ever I Will Be A Little Short on Cash For The AMP END OF IT ! What I do have is 2 Memphis MCD-1000 1100 watts RMS @ 1 Ohm Well what I Intend on doing is strapping 1 amp per sub ! Will This Work ? Also This Is going in a 95 Honda Civic all stinger 0 gauge wire and memphis rca's pioneer premier 780mp head unit and i was also thinking after the box is built which will be 37 wide 17 high 21 depth without port displacement and sub displacement it's 6.2 cu ft and also batteries i have not done that yet any suggestions ? ( I was thinking a kinetik hc 3800) but i have got to upgrade to a better alternator because the stock is only 80 amps ...any suggestions here ? 95 civic 1.6 v-tech appreciate the help ! 95 Civic Coupe Pioneer AVH-P7600DVD Kinetik HC-1200 In Front Kinetik HC-2000 In Rear Memphis 16-MCA3004 2 X Memphis 16-MCD1000 With Maxxsonics MLX-100 2 X DC LVL 4 XL 12's Pioneer Premier TS-C720PRS In Door's Kenwood KFC-6982ie In Rear Deck All Memphis Wire/Rca's and misc. Link to comment Share on other sites More sharing options...
brewer_brewer Posted July 18, 2009 Report Share Posted July 18, 2009 do you mean just wiring each btl to 1 ohm and running them on their own amp? if so, then yea that will work fine as long as you bought D2 ohm subs. REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
Tooshort064 Posted July 18, 2009 Author Report Share Posted July 18, 2009 Yeah ..... Hey BTW do you think the amps are strong enought to pound them ? ...cause i know the memphis is underated some what 95 Civic Coupe Pioneer AVH-P7600DVD Kinetik HC-1200 In Front Kinetik HC-2000 In Rear Memphis 16-MCA3004 2 X Memphis 16-MCD1000 With Maxxsonics MLX-100 2 X DC LVL 4 XL 12's Pioneer Premier TS-C720PRS In Door's Kenwood KFC-6982ie In Rear Deck All Memphis Wire/Rca's and misc. Link to comment Share on other sites More sharing options...
brewer_brewer Posted July 18, 2009 Report Share Posted July 18, 2009 they won't reach their full potential with that amount of power but they will move them pretty good. REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt" Link to comment Share on other sites More sharing options...
Tooshort064 Posted July 18, 2009 Author Report Share Posted July 18, 2009 One Quick Tech Question Before I Start This Box In The Morning ! Port Width And Depth ? 37 Wide 21 Depth 17 high 2 Fi Btl 12's Fully Loaded This Port Keeps Messing With My Head ! 95 Civic Coupe Pioneer AVH-P7600DVD Kinetik HC-1200 In Front Kinetik HC-2000 In Rear Memphis 16-MCA3004 2 X Memphis 16-MCD1000 With Maxxsonics MLX-100 2 X DC LVL 4 XL 12's Pioneer Premier TS-C720PRS In Door's Kenwood KFC-6982ie In Rear Deck All Memphis Wire/Rca's and misc. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.