Motasolo Posted August 4, 2009 Author Report Share Posted August 4, 2009 I didn't get any negative feedback yet on the rear port straight out the back. So the plan tomorrow is to flare some 6" PVC i picked up for 15$ It's the Schedule 30 green sewer piping, and I am hoping it heats up and bends ok. If it fails I will have to find some of the regular white schedule 40 in a 6" somewhere. I will post some pic's after* 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted August 5, 2009 Author Report Share Posted August 5, 2009 the 3ft pipe before first stretch, this stuff is crazy tuff side angle second stretch on tire rim, needs some re-shaping yet, and also cut to length. inside flare can be a lil smaller from what I read. Going try a one piece port lol. I will post more pics tomorrow. Peace~ 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
sounddesires Posted August 5, 2009 Report Share Posted August 5, 2009 that lil port flare job is badasss...cant wait to see more Link to comment Share on other sites More sharing options...
Motasolo Posted August 8, 2009 Author Report Share Posted August 8, 2009 Finishing the port, sort of... cut to length test fit went ok Schedule 30 is thick and hard to flex, I might try again down the road on some PVC40 Wiring the sub in the box after bonder cures more pic's coming, looking for amp to break in sub till I can afford a sexy DAT amp! 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted August 8, 2009 Author Report Share Posted August 8, 2009 Trunk light burnt out and I had a 12v LED strip. Zip-ties to place then hot-glued! flash was on first pic so fun I jumped jk forgot to hang the wires up Pretty bright at night, there was a small resistor in the old trunk light wiring... Wonder what that did... Peace 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted August 9, 2009 Author Report Share Posted August 9, 2009 More pics, made a bottom board to cover the spare tire hole and mounted brakets almost done! are we spose to blur the plates? I dunno heh Nikon CoolPix, always gives me a blurred pic any ideas? I tried faster shutter speed... Port right where I wanted! I need to paint and silicone it yet after I find some $$ Peace 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted August 9, 2009 Author Report Share Posted August 9, 2009 pic of the Fi BTL foam surround glued to the edge, curious if a wide head screw is bad on pulling the foam down when crankin them tight??? 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
brsteinbach Posted August 9, 2009 Report Share Posted August 9, 2009 Looks awesome bro. Nice work on everything. 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast.... Link to comment Share on other sites More sharing options...
Motasolo Posted August 9, 2009 Author Report Share Posted August 9, 2009 So I am supposed to mount these subs with the gasket in figure A or B: A with the bolt on the foam surround or B with the black gasket over the foam and a bolt/washer on top of that? I never mounted such a beast 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted August 12, 2009 Author Report Share Posted August 12, 2009 Port Paint and misc.. was the first coat, looks better now cont... 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.