Motasolo Posted May 2, 2010 Report Share Posted May 2, 2010 Welcome to my second build log, a small project on my friends 1990 Nissan Maxiam 4 Door Sports Car! There was a light system previously installed by various shops already in this car and is being redone. It is real! 4DSC! http://www.youtube.com/watch?v=kRI-Ntc9BpA The first collection of pics is my 1st attempt at fiberglass, making new front door speaker panels for 6x9's. The old panel, used for template panels cut Ring's for 6x9's Ring's cut If only this was the end. The magents will be sit back into the panels. We got some help from my old man routing the edges off to match the stock panels shape. Braces for rings and edge cut with router. More to post yet... Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted May 2, 2010 Author Report Share Posted May 2, 2010 This bottom section overlaps the top part of the door panel Glues and screwed Test fit with old speaker With grille Mounting to door The door even shuts... cont... Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted May 2, 2010 Author Report Share Posted May 2, 2010 And now the fun part? Soaked the MDF with Resin They dried We borrowed a blanket Glued the fabric into the grooves so it does not lift up when resin is added Left side covered with fabric Looks like left side also other side Some resin Itchy fiberglass I heard to rip and not cut, which is ok besides more itchyness first coats of resin and fiber Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted May 2, 2010 Author Report Share Posted May 2, 2010 more and more Enough of the fiberglass Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Motasolo Posted May 2, 2010 Author Report Share Posted May 2, 2010 (edited) Cleaned up a bit it fits again Sanding is difficult New 6x9's have larger magnets. More work on those later, I will post some big3 pics tomorrow. Peace~ Edited May 2, 2010 by Motasolo Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Blue Posted May 3, 2010 Report Share Posted May 3, 2010 I myself have a 94 maxima. I also did some lower door panels on mine. Those doors are freaking easy to do. Just unscrew the lower portion of the panel, and trace it out and glass. But why 6x9's? I did mine for 6.5" comps. Its a bitch to feed the wires through the doors, have fun with that. If you need some help with box ideas I have built a couple. Doing a new one tomorrow. Dunno if it will fit though. Also, take off that back cardboard thing behind the back seat. Allows for a lot more sound to come through into the cabin. Quote formerly known as Blue86f150 its a 4th order just because its tuned in the 40z doesnt mean it wont reach down and jiggle your balls at sub 30 hz frequencies. Regardless if they were dipped platinum and were stuffed in Beyonce's twat.....way too fucking exspensive this sux camel dicks Link to comment Share on other sites More sharing options...
Motasolo Posted May 5, 2010 Author Report Share Posted May 5, 2010 The new wires from KnuKonceptz 1/0 and 8ga speaker wire Ground crimped and covered with heat shrink Chassis ground Engine ground White is the Alternator wire I did not get a close pic of, the red is the power to the back More to upload Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Blue Posted May 5, 2010 Report Share Posted May 5, 2010 Getting there. also, dunno if your buddy is going to be putting a sub system in, but the peak frequency in mine is 41hz. Just a future reference if he wants to go for spl Quote formerly known as Blue86f150 its a 4th order just because its tuned in the 40z doesnt mean it wont reach down and jiggle your balls at sub 30 hz frequencies. Regardless if they were dipped platinum and were stuffed in Beyonce's twat.....way too fucking exspensive this sux camel dicks Link to comment Share on other sites More sharing options...
USLESS Posted May 10, 2010 Report Share Posted May 10, 2010 lookin good man keep the pics comin Quote my 94 ranger build http://www.stevemead...4-ranger-build/ Link to comment Share on other sites More sharing options...
Motasolo Posted May 19, 2010 Author Report Share Posted May 19, 2010 Thanks for the comments guys, I am uploading another batch of pics right now. Got most of the car put back together and the doors are done, so I will try and get to the other areas being worked on. Quote 00' GP GT 12" Fi BTL Build log with pic's :] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.