Saltine Posted April 6, 2007 Author Report Posted April 6, 2007 ok change up again. i was told 1 kinetic 800 would work but to be safe a 1200 was recomended as for amps need to know if this will work subs are dual 1 ohm i want to run 4 fusion 1500's powerplant amps which put out 550 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N 850 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N they are strapable but i was thinking doing 1 amp per voice coil and setting them to give each coil around 700 watts. will it work with the 1 ohm subs to get what i need Quote
Chris Posted April 6, 2007 Report Posted April 6, 2007 For a stack you can be lookin at a T4000.1BD! Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Saltine Posted April 6, 2007 Author Report Posted April 6, 2007 For a stack you can be lookin at a T4000.1BD! not around here. as i posted above im looking to get something local so i dont have to ship it back if it breaks and deal with all those headaches and i think the 4000.1 here goes for about $2000 Quote
Chris Posted April 6, 2007 Report Posted April 6, 2007 It's kinda hard to fry one of those Steve Meade amps, they are .7ohm stable and I swear you would save soooo much money gettin it online. One could probably find a better deal than this & it's a little over a G. http://www.cartronixplus.com/templates/det...%20Amplifier%20 Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR.
Guest Nismofreak Posted April 6, 2007 Report Posted April 6, 2007 WOW to much money. Go pa or hifonics for a first. Quote
Guest Nismofreak Posted April 6, 2007 Report Posted April 6, 2007 But if you wanna spend money go rf for quality. Quote
Saltine Posted April 6, 2007 Author Report Posted April 6, 2007 well, prolly just gonna go with 2 Fusion 2000s 1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N i rather a lil more power but i can get these amps all day for about $325 and they do what these advertise. Quote
sean 371 Posted April 7, 2007 Report Posted April 7, 2007 1% THD is ridiculous high. RF T10001bd = 1300-1500 watts at 1 ohm, .5% thd i believe, and only 360 shipped if you look around ebay. Quote A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
sean 371 Posted April 7, 2007 Report Posted April 7, 2007 lol, but .5% is still high if you compare it to McIntosh's .005%. But thats a $2500 amp, and only does 600 watts. haha nuckin futs Quote A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
Saltine Posted April 9, 2007 Author Report Posted April 9, 2007 quick help please ok im not the biggest kicker fan, but plenty ppl have been recomending there zx series amps. the few ppl i know who had the 600's they all burnt up but it could have been b/c of installer error. anyway i have a kicker dealer by me who ima check out tommorow for prices. im looking at 1 amp per sub. looking at 2 1500 mono amps. they say 1500x1 at 2ohms which if wiring the dual 1 ohm sub in series to the amp should pull 2 ohms right. if so thats perfect for me does this sound right Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.