Amp Frequency Setting

[josh237]

Hello all I just installed my mids and Highs and I got a new amp and wanted to know what frequecy I should use for the mids and highs as it goes from I think 50hz to 500hz where should I have it for mids and Highs thanks

Josh

[finkster]

do u have a crossover for them. are they comps or are they coaxials?

Edited August 27, 2009 by finkster

[josh237]

do u have a crossover for them. are they comps or are they coaxials?

they are comps

[finkster]

which ones? look up the specs online and then adjust accordingly.

[josh237]

which ones? look up the specs online and then adjust accordingly.

http://www.poweracoustik.com/pa2006/produc...O_COMP_xp2k.htm

what would you recommend

[Neel]

So im assuming that the setting your talking about is the low pass filter, If you are using the crossover that came with the speakers I would just let it handle all the crossover points and slopes. Leave the amp setting at 50hz so you are giving the set as close to a full range signal as possible.

[josh237]

So im assuming that the setting your talking about is the low pass filter, If you are using the crossover that came with the speakers I would just let it handle all the crossover points and slopes. Leave the amp setting at 50hz so you are giving the set as close to a full range signal as possible.

I am using http://www.poweracoustik.com/pa2006/produc...O_amp_stax.html

1250/2

and I am using the HPF on the amp as well when I move it to 50 is seems to have more bass as I wand to limit some of that out I have the know straight across towards 500hz