josh237 Posted August 27, 2009 Report Share Posted August 27, 2009 Hello all I just installed my mids and Highs and I got a new amp and wanted to know what frequecy I should use for the mids and highs as it goes from I think 50hz to 500hz where should I have it for mids and Highs thanks Josh Quote Link to comment Share on other sites More sharing options...
finkster Posted August 27, 2009 Report Share Posted August 27, 2009 (edited) do u have a crossover for them. are they comps or are they coaxials? Edited August 27, 2009 by finkster Quote DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living Link to comment Share on other sites More sharing options...
josh237 Posted August 27, 2009 Author Report Share Posted August 27, 2009 do u have a crossover for them. are they comps or are they coaxials? they are comps Quote Link to comment Share on other sites More sharing options...
finkster Posted August 27, 2009 Report Share Posted August 27, 2009 which ones? look up the specs online and then adjust accordingly. Quote DAT 4125------>RE XXX comps active Eclipse cd7000 I serve drunks for a living Link to comment Share on other sites More sharing options...
josh237 Posted August 27, 2009 Author Report Share Posted August 27, 2009 which ones? look up the specs online and then adjust accordingly. http://www.poweracoustik.com/pa2006/produc...O_COMP_xp2k.htm what would you recommend Quote Link to comment Share on other sites More sharing options...
Neel Posted August 27, 2009 Report Share Posted August 27, 2009 So im assuming that the setting your talking about is the low pass filter, If you are using the crossover that came with the speakers I would just let it handle all the crossover points and slopes. Leave the amp setting at 50hz so you are giving the set as close to a full range signal as possible. Quote Too Much Stuff to list . Link to comment Share on other sites More sharing options...
josh237 Posted August 27, 2009 Author Report Share Posted August 27, 2009 So im assuming that the setting your talking about is the low pass filter, If you are using the crossover that came with the speakers I would just let it handle all the crossover points and slopes. Leave the amp setting at 50hz so you are giving the set as close to a full range signal as possible. I am using http://www.poweracoustik.com/pa2006/produc...O_amp_stax.html 1250/2 and I am using the HPF on the amp as well when I move it to 50 is seems to have more bass as I wand to limit some of that out I have the know straight across towards 500hz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.