Texas Tech Posted April 12, 2007 Report Share Posted April 12, 2007 http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=12144 Do you get a pair or just one woofer one tweeter and a crossover. It may sound really stupid but i am a little scetchy about the title "5.25" 2-Way QSD Series Separate Components" saying seperate components. And also, does anyone know if you can wire tweeters toa two ohm load? Quote Baylor University Accounting Link to comment Share on other sites More sharing options...
Chris Posted April 12, 2007 Report Share Posted April 12, 2007 Sensitivity: 85 dB RMS Power Range : 70 Watts Peak Power Handling: 150 Watts Frequency response: 50-32000 Hz Diameter: 5.25 Inch Features Impedance: 4 Ohms Frequency Response: 50-32k Sensitivity: 85 dB Power Range: 70-150 watts Crossover Freq: 2400Hz Hz QTD 25 Tweeter 1" (25mm) Q Series Neo/Al Tweeter QWD 130 Midrange 5.25" (130mm) QSD SeriesMidrange Driver QXD 213 Xover BTT MUSiCOMP Crossover for the QSD 213 MOUNT: 25NX SURFACE Rings Surface Mounting Ring for 25NX Tweeters MOUNT: 25NX ANGLE Rings Angle Mounting Ring for 25NX Tweeters MOUNT: 25NX FLUSH Rings Flush Mounting Ring for 25NX Tweeters QM 130.78 AUFBAU Mounting Kit Raised mounting ring (.47") for 130.03KX QM 130.79 MS EINBAU Mounting Kit Flush Rings & Grilles for 130TX-3 Priced per pair Component speakers are usually come as a pair unless noted differently. Warranty: 1 Year Onlinecarstereo.com warranty. 1 Year warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties. Solved that problem! Next! Oh yes, you can wire tweeters to a 2ohm load. I think Meade has some in this configuration. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
Texas Tech Posted April 12, 2007 Author Report Share Posted April 12, 2007 Thanks, yea i saw that but i wanted to be reassured before i drop 300 on them. And yea, it looks that way on his diagram... thanks bro Quote Baylor University Accounting Link to comment Share on other sites More sharing options...
Chris Posted April 12, 2007 Report Share Posted April 12, 2007 No problem man. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
Texas Tech Posted April 12, 2007 Author Report Share Posted April 12, 2007 how many watts RMS can those tweeters take, 70 Watts? figured that was just for the woofers...? Quote Baylor University Accounting Link to comment Share on other sites More sharing options...
Chris Posted April 12, 2007 Report Share Posted April 12, 2007 Well since they are components & come with a passive crossover system to separate high frequencies from low/ vice versa you will have a single 70watt RMS input connected to the crossover which it will then split accordingly to the woofer & tweeter outputs. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
Texas Tech Posted April 12, 2007 Author Report Share Posted April 12, 2007 oh, i see, I ahve obviously never dealt with component systems before. So the woofers wont be getting 70 Watts RMS, the woofer and the tweeter will be sharing hte 70 Watts then? Thanks for the info. Would all this come in the manual of the components? Quote Baylor University Accounting Link to comment Share on other sites More sharing options...
Chris Posted April 12, 2007 Report Share Posted April 12, 2007 oh, i see, I ahve obviously never dealt with component systems before. So the woofers wont be getting 70 Watts RMS, the woofer and the tweeter will be sharing hte 70 Watts then? Thanks for the info. Would all this come in the manual of the components? Yes, MB Quart will definately tell you exactly how to set them up, but really they are a piece of cake once you have them in your hands. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
Texas Tech Posted April 12, 2007 Author Report Share Posted April 12, 2007 was that yes the answer to this question... So the woofers wont be getting 70 Watts RMS, the woofer and the tweeter will be sharing the 70 Watts then? Quote Baylor University Accounting Link to comment Share on other sites More sharing options...
Chris Posted April 12, 2007 Report Share Posted April 12, 2007 Most certainly my fellow comrade. Quote 4 15" FI Q D2's in 12 cubes tuned to 32hz 1- T1000.1bd's 3 Maxx 29 deep cycles 4 runs of 1/0 gauge -Big 3 -Trunk sealed off from the cabin Custom 15.8 dual-volt switching MLA module All in a CAR. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.