morales209 Posted September 13, 2009 Author Report Share Posted September 13, 2009 if someone local picks it up, i will knock off a few bucks Link to comment Share on other sites More sharing options...
iTech Posted September 13, 2009 Report Share Posted September 13, 2009 It's 2 volts not 5. SonicElectronix My Official Feedback Thread PSN - tech2332 Games for PS3: Killzone 2, BattleField: Bad Company 2! Add me to play either! Link to comment Share on other sites More sharing options...
morales209 Posted September 13, 2009 Author Report Share Posted September 13, 2009 no its 5 volts. Link to comment Share on other sites More sharing options...
raytard Posted September 13, 2009 Report Share Posted September 13, 2009 to back this guy up, i believe the exelon screens are all 5v, and the kenwood site has it listed as 5v, although honestly everywhere else says its 2v did kenwood pull one of those tricks like pioneer did, where 4volt means 4volts split 3 ways (so 1.33v....)(just saying, going from their single cd to avic-f90 the volumewas noticably lower, and everyone that switched from the "4v" f90 to the "4v" z110 said they had to turn their gains down significantly, since volume 20 was as loud as the f90 at 50 Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
morales209 Posted September 13, 2009 Author Report Share Posted September 13, 2009 to back this guy up, i believe the exelon screens are all 5v, and the kenwood site has it listed as 5v, although honestly everywhere else says its 2vdid kenwood pull one of those tricks like pioneer did, where 4volt means 4volts split 3 ways (so 1.33v....)(just saying, going from their single cd to avic-f90 the volumewas noticably lower, and everyone that switched from the "4v" f90 to the "4v" z110 said they had to turn their gains down significantly, since volume 20 was as loud as the f90 at 50 kenwood site says 5 volt and the box the unit came in says 5 volts. if it was the basic kenwood model then yes there 2 volts but excelon is there top of the line and all are 5 volts Link to comment Share on other sites More sharing options...
morales209 Posted September 14, 2009 Author Report Share Posted September 14, 2009 450 local Link to comment Share on other sites More sharing options...
FYI-Future-Star Posted September 14, 2009 Report Share Posted September 14, 2009 bump for a great HU i had one and its one of the best IMO Team O.B.M '97 Tahoe Build after the new year!!! Kenwood kdc-x794/16gig android tablet 6 sets of Crescendo ccx65s 2 18s 2 Sundown saz 4500s 2 Sundown sax 100.4 1 Mechman SMD spec 360a 4 XS d1400s My Feed Back http://www.stevemead...showtopic=44841 ub Link to comment Share on other sites More sharing options...
Shyne151 Posted September 14, 2009 Report Share Posted September 14, 2009 bump for a bad ass unit. Definitely is 5v. -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
gremlin Posted September 14, 2009 Report Share Posted September 14, 2009 pm sent current set-up: headunit: kenwood excelon kdc-x891 mids: front: mb quart reference 6.5s rear: pioneer TSA941 6x9 mid and high amp: performance technique ICBM-773 sub amp: kicker 08zx2500.1 subs: (2) 08s15l7d2 4.25 cubic foot sealed box big 3 all in hooker 1/0 wiring Sacrifice your car to the Audio Gods and DBs will come. Link to comment Share on other sites More sharing options...
morales209 Posted September 15, 2009 Author Report Share Posted September 15, 2009 ttt Link to comment Share on other sites More sharing options...
Recommended Posts