Lowroll Posted September 14, 2009 Report Share Posted September 14, 2009 So im trying to use Win ISD to deisgn a new box & when I go to enter the t/s parameters I cant find the Le of the SoundStream RW-12. What is Le? Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Cr@sh Posted September 14, 2009 Report Share Posted September 14, 2009 From www.the12volt.com Le - "This is the voice coil inductance measured in millihenries (mH). The industry standard is to measure inductance at 1,000 Hz. As frequencies get higher there will be a rise in impedance above Re. This is because the voice coil is acting as an inductor. Consequently, the impedance of a speaker is not a fixed resistance, but can be represented as a curve that changes as the input frequency changes. Maximum impedance (Zmax) occurs at Fs. " My old install at cardomain, never finished! Link to comment Share on other sites More sharing options...
Lowroll Posted September 14, 2009 Author Report Share Posted September 14, 2009 Okay, so how do I find it for my subs? There is no parameter measured in mH or atleast not one that I saw. Thats the only spec im missing. Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
aznboi3644 Posted September 14, 2009 Report Share Posted September 14, 2009 Le is not really needed for enclosure design. Link to comment Share on other sites More sharing options...
Lowroll Posted September 14, 2009 Author Report Share Posted September 14, 2009 Le is not really needed for enclosure design. Oh okay. Im still trying to figure out the whole Win ISD thing, but I guess this is the answer I was looking for. I didnt want to think I had a great design, find the Le, enter it & F up the whole design. thanks homie. Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.