Guest Nismofreak Posted April 20, 2007 Report Posted April 20, 2007 I wanted to buy a circle jig. I got a router today and was wondering. Where can I buy a cricle jig? or does Home depot sell some? Is it worth buying?
sean 371 Posted April 20, 2007 Report Posted April 20, 2007 Buy a jasper jig, off www.partsexpress.com and YES!!!! it resoundingly worth it. No better tool in the book, except for my brad nailer. If you have a router and build sub boxes, you NEED one of these. A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
Guest Nismofreak Posted April 20, 2007 Report Posted April 20, 2007 Can I get something at home depot? I need to start workin on my doors tommorow.
BassJunkie Posted April 20, 2007 Report Posted April 20, 2007 Home depo has sooo much stuff, they gotta have one... 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router.
Guest Nismofreak Posted April 20, 2007 Report Posted April 20, 2007 I need one for tommorow. Hoping they have something useful.
sean 371 Posted April 20, 2007 Report Posted April 20, 2007 They might, but I'd go with a jasper jig. What I did for a while, was just had a piece of thin plywood that I attached to the bottom of my router. Id measure out (from the cutting side of the bit) however big of a radius I needed, and drill a small hole there. Then I'd just put a nail through that hole into the center of what I'm cutting out. Voila, perfect circle. It's the same concept, just free and not as durable. A couple links to some box builds: Tahoe Box 1, Tahoe Box 2, Nissan Titan, VW GTI, Mini-Bump, Hummer H2, Ford F-150 My own car builds (current setup --- under construction): Overall Thread, Kickpods, Dash, Back Doors Subwoofer Wall
Guest Nismofreak Posted April 20, 2007 Report Posted April 20, 2007 I will see. I need one ASAP for tommorow but is their another band I could look into that home depot sells?
07mazda3s Posted April 20, 2007 Report Posted April 20, 2007 They might, but I'd go with a jasper jig.What I did for a while, was just had a piece of thin plywood that I attached to the bottom of my router. Id measure out (from the cutting side of the bit) however big of a radius I needed, and drill a small hole there. Then I'd just put a nail through that hole into the center of what I'm cutting out. Voila, perfect circle. It's the same concept, just free and not as durable. Thats what I was gonna say, my dad has a lil something like that made of plexiglass and thats what I use when I build boxes. Power Acoustik fubar 12 sony xploding amp 2 ft^3 box @ 35hz
Guest Nismofreak Posted April 20, 2007 Report Posted April 20, 2007 They might, but I'd go with a jasper jig.What I did for a while, was just had a piece of thin plywood that I attached to the bottom of my router. Id measure out (from the cutting side of the bit) however big of a radius I needed, and drill a small hole there. Then I'd just put a nail through that hole into the center of what I'm cutting out. Voila, perfect circle. It's the same concept, just free and not as durable. What part would you attach it to your router. Got any pics cuzz I can't figure it out.
07mazda3s Posted April 20, 2007 Report Posted April 20, 2007 What part would you attach it to your router. Got any pics cuzz I can't figure it out. Attach it to the bottom of the router, measure the radius of the sub from the furthest outside part of the bit and then drill the hole. Put the nail in and you got a perfect circle. Power Acoustik fubar 12 sony xploding amp 2 ft^3 box @ 35hz
Recommended Posts