YoungHollywood919 Posted September 15, 2006 Report Posted September 15, 2006 WAT WOULD DAT SOUND LIKE. WOULD IT PUMP OR SOUND LIKE SHIT. AND WHEN I SAY DIAMOND PLATE I MEAN THAT METAL SHIT.
ChevyBoy Posted September 15, 2006 Report Posted September 15, 2006 ive gone through this on another forum be4. it would pretty much blow. it would flex WAY too much. the only way u could possibly make a metal box sound good is if u would use like 3/8-1/2 steel, if not thicker. on the other hand, u can make a box and put the diamond plate on the outside of it. might not sound all that bad. or just use that plastic vinyl shit that looks like it
Guest 90accordman Posted September 15, 2006 Report Posted September 15, 2006 ive gone through this on another forum be4. it would pretty much blow. it would flex WAY too much. the only way u could possibly make a metal box sound good is if u would use like 3/8-1/2 steel, if not thicker. on the other hand, u can make a box and put the diamond plate on the outside of it. might not sound all that bad. or just use that plastic vinyl shit that looks like it I made a box like that for a jeep, regular box but cut diamond plate for all the outside panels so it would look like it was made from diamond plate didnt sounds any diff form the reg MDF box. Wish i still had pictures, it looked nice because the jeep had alot of the same plating on it
ChevyBoy Posted September 15, 2006 Report Posted September 15, 2006 try and dig some up. i wanna see that. and also, i would wanna hear what a diamond plate box would sound like just for shits and giggles.
Guest 90accordman Posted September 15, 2006 Report Posted September 15, 2006 try and dig some up. i wanna see that. and also, i would wanna hear what a diamond plate box would sound like just for shits and giggles. like shit, its not thick enough to keep the sound in neough for the box to function properly, you would have to brace/deaden it so much, thats its not really a diamond plate box anymore
ChevyBoy Posted September 15, 2006 Report Posted September 15, 2006 ah just put a layer of dynamat down and ur straight :^
ChevyBoy Posted January 19, 2007 Report Posted January 19, 2007 http://knukonceptz.com/knukarView.cfm?StartRow=4 just found that. bumping up an old topic.
Pokey Posted January 19, 2007 Report Posted January 19, 2007 We've talked about doing this before...just with 3/8 in. steel plate....I still wanna try that and see how it'll work out.
ChevyBoy Posted January 19, 2007 Report Posted January 19, 2007 yea i know, but this thread was easier to find so i just put it here
Pokey Posted January 19, 2007 Report Posted January 19, 2007 I believe the thread where we were talking about the metal box was brought up all off topic in someone else's thread.
Recommended Posts