AMMAY Posted September 15, 2006 Report Share Posted September 15, 2006 I am wondering how anyone else did it. My rides trunk just had a piece of carpet lying on the metal floor and the crappy cardboard 'floor' was ripped out. I wanted the enclosure right behind the backseat. I cut a 5/8" piece of mdf, and wrapped the perimeter with some metal angled steel. I then ran two lengths of steel down the length on both sides so the metal was completely built around the board, and tacked that into the trunk, ran the carpet over it, and that was it, solid. Because the board overhung the spare tire well a little, I was able to bolt the enclosure to the board, through the metal. It does not budge. Link to comment Share on other sites More sharing options...
Guest 90accordman Posted September 15, 2006 Report Share Posted September 15, 2006 got any pics? would be interesting to see Link to comment Share on other sites More sharing options...
AMMAY Posted September 16, 2006 Author Report Share Posted September 16, 2006 The enclosure covers it completely, I do have to remove the enclosure but dont know when Ill get to that, Ill take pics then. Its not pretty but it does its job! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.