12voltz+- Posted October 2, 2009 Report Share Posted October 2, 2009 any in put is great here are both the designs basically i cant decide if want the port center to the drivers or to the passengers side ! any help?? Quote Link to comment Share on other sites More sharing options...
raytard Posted October 2, 2009 Report Share Posted October 2, 2009 i dont really know much about 6th orders, but wouldnt the non-centered design load kinda weird? the center/center design looks more...correct Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
12voltz+- Posted October 2, 2009 Author Report Share Posted October 2, 2009 thats what im guessing my self again and again lol Quote Link to comment Share on other sites More sharing options...
EricR Posted October 2, 2009 Report Share Posted October 2, 2009 looks to me like the one with both ports centered wouldn't work to efficiently as a 6th order as the back port would just be going straight out the front. im not real sure though, i like 4th orders better Quote i was thinking leave the 12 sitting in the box in the hole and duck tape from the bottom of the sub to the bottom of the baffle so the sub doesnt free air. would that work? Link to comment Share on other sites More sharing options...
12voltz+- Posted October 2, 2009 Author Report Share Posted October 2, 2009 not for dd 9500s 4th order seald chambers can hurt me Quote Link to comment Share on other sites More sharing options...
rawlins87 Posted October 2, 2009 Report Share Posted October 2, 2009 port on pass side Quote Link to comment Share on other sites More sharing options...
Syko DJ Posted October 2, 2009 Report Share Posted October 2, 2009 center port looks right but not sure if it is Quote For beats Click Here Head Unit- power acoustik 8" touchscreen doors-RE 57 fr sub - sundown audio e8 amp-PG v752 Link to comment Share on other sites More sharing options...
korey_hofer Posted October 2, 2009 Report Share Posted October 2, 2009 have you ever done a 6th order before? Quote previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street. Link to comment Share on other sites More sharing options...
Ben Building Posted October 2, 2009 Report Share Posted October 2, 2009 Nice Box! If you get the ports right, it will bang!! :hairtrick: :hairtrick: If I were you, I would not put the internal port right in front of the main port. The reasons for this don't pertain to tuning (it will be about the same), but rather with port noise. If the internal port is right in front of the other, then you will be able to hear any noises the internal port makes. Tucked over into the corner, it will be shielded by the wood. If you haven't done a box like this before, I would highly recommend using round ports for the internal, just in case you need to change tuning. I apologize for this unwanted advice if you've already done a test box and already know where to tune... Good luck. Quote Link to comment Share on other sites More sharing options...
korey_hofer Posted October 2, 2009 Report Share Posted October 2, 2009 Nice Box! If you get the ports right, it will bang!! :hairtrick: :hairtrick: If I were you, I would not put the internal port right in front of the main port. The reasons for this don't pertain to tuning (it will be about the same), but rather with port noise. If the internal port is right in front of the other, then you will be able to hear any noises the internal port makes. Tucked over into the corner, it will be shielded by the wood. If you haven't done a box like this before, I would highly recommend using round ports for the internal, just in case you need to change tuning. I apologize for this unwanted advice if you've already done a test box and already know where to tune... Good luck. well I wouldn't but it has nothing to do with port noise, it's so the port loads the chamber and not the second port. the one with thte middle ports will act like a series tuned 6th order instead of a parallel Quote previously known as wenn_du_weinst aka fucking internet coward supreme. I talk shit on other forums like a little bitch and hope i don't get caught out on the street. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.