kfx450r Posted October 4, 2009 Report Share Posted October 4, 2009 Do these amps do more than rated? Im pretty sure there rated at 14.4 but if you had the electrical to hold that with no drops could you see more? Picked up a MRP-M450 wondering if I can expect to squeeze 500 out of it. There only rated for 400 tho despite the 450 name id guess they can do 450 rms Quote Link to comment Share on other sites More sharing options...
Rogers Posted October 4, 2009 Report Share Posted October 4, 2009 i wouldnt expect more than rated... but they are good amps none the less.... Quote http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
Guest DC Power Kyle Posted October 4, 2009 Report Share Posted October 4, 2009 Before I got into a good electrical system I had problems with them shutting off with voltage drop.... I don't expect anything over rated on them... but i'm not sure. Quote Link to comment Share on other sites More sharing options...
DylanH Posted October 4, 2009 Report Share Posted October 4, 2009 (edited) Do these amps do more than rated? Im pretty sure there rated at 14.4 but if you had the electrical to hold that with no drops could you see more? Picked up a MRP-M450 wondering if I can expect to squeeze 500 out of it. There only rated for 400 tho despite the 450 name id guess they can do 450 rms I have a single mrp-m1000 running my 2 alpine type r 12s and it hits like a mother F***** lol. Its crazy loud o and by the way..I have no electrical upgrades and it does great Edited October 4, 2009 by LookingForBass Quote http://www.youtube.c...er/SmallTownSPL 2002 Chevy Blazer Substage: Shhh, its a secret Mids and Highs: Stock-Going to change soon Amp:MTX 92001 Wire:1/0 Welding cable Electrical:Stock http://www.stevemead...__fromsearch__1 I hope she was meaning that to you. Any who.... You dont say you wanna have dinner in the first damn post. talk to her first. I say find out if the status was torwards you.. Here try this... "Hey hows it going ( notice smiley face makes everything better ) I saw your status. "You are far from usual".... So is my dick... Wanna Fuck tommorow???" Or send her message saying "hey" she replies back "hey" when this happens reply Wanna fuck (INSERT ADDRESS HERE) Quote of the SPL Creed ; back in the day my girlfriend gave me a choice between her and my love for car audio, I told that bitch I've made harder decisions at the Coke machine. Link to comment Share on other sites More sharing options...
Rogers Posted October 4, 2009 Report Share Posted October 4, 2009 and i dont think they can handle 16 volts either..... but if you have good electrical... it will give you a solid 400-450rms Quote http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
kfx450r Posted October 4, 2009 Author Report Share Posted October 4, 2009 Yah I dont doubt that they are solid amps that do rated, just curious as to if they did a little more or not. I guess only way is to get it benched. Quote Link to comment Share on other sites More sharing options...
bigredishott Posted October 4, 2009 Report Share Posted October 4, 2009 my 2 sub amps came with like birth sheets, and they both give me a lil over 50 watts extra. Not sure about my PDX amp, dont remember seeing a birth sheet in the box. Quote Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
raytard Posted October 4, 2009 Report Share Posted October 4, 2009 its 50 watts....thats like a .1db increase at that point. Dont worry about it too much, its barely enough to hear. and watch it on lower impedances, they like to get hot. the v's were worse but the mrp's arent cool running by any means. Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
kfx450r Posted October 4, 2009 Author Report Share Posted October 4, 2009 (edited) its 50 watts....thats like a .1db increase at that point. Dont worry about it too much, its barely enough to hear.and watch it on lower impedances, they like to get hot. the v's were worse but the mrp's arent cool running by any means. yah its rated for 400 but its called a 450 so i figured id get atleast 450 ah well..Thats fine, thanks Gonna run it at 2 ohms, which im pretty sure there rated at 2 ohms. Edited October 4, 2009 by kfx450r Quote Link to comment Share on other sites More sharing options...
bigredishott Posted October 4, 2009 Report Share Posted October 4, 2009 All of my amps stay very cool, the PDX and the V series. I have a v series 4 channel a/b class that one gets hot, but I replaced it with the PDX. And for an amp that is rated 600 watts and extra 50 is almost 10% more. Quote Alpine CDA-9847 HU F Highs 2x Infinity Kappa 60.9CS Powered by Eclipse EA4200 Glass door panels R Highs Infinity Ref. 9622i powered by HU 3x RF Punch HX2 RFD2210 Powered by MTX Thunder 81000D Box Vol. 3.259 before displacement, Tuned 36.6, Port area 54" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.