ModFreak Posted October 25, 2009 Report Posted October 25, 2009 Ok so am running 4 1000 watt amps. Im going to have a second battery in the back. If i run a 1/0 wire from the battery into a fuse block with a 300/350 fuse, do i need to run a fused dist block? Or would i be safe running a standard block that is 2 1/0 in and 4 4awg out?
D Y L A N Posted October 25, 2009 Report Posted October 25, 2009 Are your 1/0 wires fused? 1999 Mazda B-2500 Regular Cab/Shortbed HU - JVC El-Kameleon kdx-111 EQ - Soundstorm 7 band EQ Mids - ALPINE Type-R 5x7" in the doors Mids - ALPINE Type-R 5.25" in the rear Highs - Rockford Fosgate P1T-S in the pillars Bass - Two 12" Rockford Fosgate P3S Enclosure - Custom sealed at 2.15 cu ft Power - Two ALPINE 500W V-series Rockford Fosgate wiring and Dynamat everywhere. Under Construction Custom Door Panels with 6.5 RF Power Components with 2 18'' fi btl's ur not just gonna kill his system ur gonna kill him too lol...
ModFreak Posted October 25, 2009 Author Report Posted October 25, 2009 yea they will both be fused by either a 300 or 350 anl.
D Y L A N Posted October 25, 2009 Report Posted October 25, 2009 I'm sure it would be fine. 1999 Mazda B-2500 Regular Cab/Shortbed HU - JVC El-Kameleon kdx-111 EQ - Soundstorm 7 band EQ Mids - ALPINE Type-R 5x7" in the doors Mids - ALPINE Type-R 5.25" in the rear Highs - Rockford Fosgate P1T-S in the pillars Bass - Two 12" Rockford Fosgate P3S Enclosure - Custom sealed at 2.15 cu ft Power - Two ALPINE 500W V-series Rockford Fosgate wiring and Dynamat everywhere. Under Construction Custom Door Panels with 6.5 RF Power Components with 2 18'' fi btl's ur not just gonna kill his system ur gonna kill him too lol...
ModFreak Posted October 25, 2009 Author Report Posted October 25, 2009 Well im thinking the same thing, but would like to hear some more opinions before i start running wires. So anyone else please give me your input. Thanks
Recommended Posts
Archived
This topic is now archived and is closed to further replies.