thumpintundra Posted November 4, 2009 Author Report Share Posted November 4, 2009 ?...bump Quote Link to comment Share on other sites More sharing options...
1992Chevy K1500 Posted November 4, 2009 Report Share Posted November 4, 2009 Where will the box be? Under the rear seat? Quote My comp setup (Not bad for what it is): HP Compaq Presario V6120US laptop with: 15.4" widescreen AMD Turion 64 X2 1.6GHz processor 2x1GB stick DDR2 SDRAM (667 Mhz) Seagate Momentus 500GB SATA HDD 128MB shared video memory Windows 7 Home Premium 64 bit 12 cell Lithium Ion battery (actual battery usage time: 6 hours) What it does: On a USB 2.0 Wireless card Link to comment Share on other sites More sharing options...
thumpintundra Posted November 4, 2009 Author Report Share Posted November 4, 2009 yeah under the rear seat Quote Link to comment Share on other sites More sharing options...
1992Chevy K1500 Posted November 4, 2009 Report Share Posted November 4, 2009 I'd say port forward. But someone may say different. Quote My comp setup (Not bad for what it is): HP Compaq Presario V6120US laptop with: 15.4" widescreen AMD Turion 64 X2 1.6GHz processor 2x1GB stick DDR2 SDRAM (667 Mhz) Seagate Momentus 500GB SATA HDD 128MB shared video memory Windows 7 Home Premium 64 bit 12 cell Lithium Ion battery (actual battery usage time: 6 hours) What it does: On a USB 2.0 Wireless card Link to comment Share on other sites More sharing options...
thumpintundra Posted November 4, 2009 Author Report Share Posted November 4, 2009 so you don't think a ported downfire would sound bad either? like i posted above..the guy who is helping me build the box says to only seal downfires Quote Link to comment Share on other sites More sharing options...
z71kris Posted November 4, 2009 Report Share Posted November 4, 2009 I have a sealed upfire with 15's and about 4lbs of poly fill, I don't know if I can get much louder with my set up... Quote 03 GMC Sierra Z71 Ext Cab l 2 15" American Bass XO's l 1 Lanzar HTG2600 l AudioVox 1510D In dash DVD l KnuKonceptz Wiring l Big Three Done with KnuKonceptz KLMX 1/0 l Infinity Reference 6022si 6-1/2" Front Door Speakers l Upgraded to 145A Alt from 105A Alt l Custom Box 2^3 under the rear bench with resined bottom, and about 4 lbs of polyfill Link to comment Share on other sites More sharing options...
keepinitloud Posted November 4, 2009 Report Share Posted November 4, 2009 if you doin the single 10 under the seat you can do the port forward or on the side Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
thumpintundra Posted November 4, 2009 Author Report Share Posted November 4, 2009 ok cool! thanks for the info kris: does the poly fill make an output difference? Quote Link to comment Share on other sites More sharing options...
keepinitloud Posted November 4, 2009 Report Share Posted November 4, 2009 ok cool! thanks for the infokris: does the poly fill make an output difference? if you do a sealed box it fools the sub into thinkin that its in a larger box if you go sealed try that just start out with a little and play it then add more till you get the desired sound from your enclosure/sub Quote 06 chrysler 300C Hemi one mmatts dreadnaut 15 powered by a planet audio vx 2200d fosgate p200 running planet audio 8" midbass drivers and super compression tweeters stock battery and a stinger spv44 Irragi 300 amp alternator big 3 1/0 http://www.stevemeadedesigns.com/board/topic/55075-system-in-my-300c/page__view__findpost__p__763656__fromsearch__1 Link to comment Share on other sites More sharing options...
thumpintundra Posted November 4, 2009 Author Report Share Posted November 4, 2009 ok cool thanks man. so it basically tricks it into thinking its a large box such as the size you'd build for like a ported box? i know the sound won't be the same... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.