Playa Named Joe Posted November 10, 2009 Report Posted November 10, 2009 Well, I suppose I should make a build thread. Going into a 1994 Pontiac Grand Prix, Rockford Fosgate T1000-1bd, Rockford Fosgate 1/0 power wire, Alpine IDA X300 (head unit), 15" AQ SDC2.5 in about 4^3 ft box tuned to 35hz. Trying to go for a really loud daily setup. Sorry for some picture being bad, camera is weird. Went from 2 10s, one a RE re10 and a TIS 10", to an AQ 15" sdc2.5, to a 15" Fi BL fully loaded, and now to a brand spanking new AQ sDC2.5 all on the same amp and the 15s in the same box. VIDS: My car, hit a deer the other day... 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 Got to hide the wire somewhere... So my battery terminal is too small, I can hook my terminal from my power wire to the battery cuz the bolt is to small, idk how to fix that... were can i get a bigger bolt? just needs a little bigger. How do you transport wood without a truck? drop the top and make a hard top. 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 Skillsaw used for ALL cuts... couldn't get my hands on a table saw... lol. and the following pictures of the box are not final assembly, just mock ups to make sure it is good. Messed up a little, for to calculate that the front doesn't go all the way acrossed... so it's 1/2 in short... 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 My SUB! AQ SDC2.5 15 Home made compass... couldn't make a circle 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 1994 Pontiac Grand Prix build
Playa Named Joe Posted November 10, 2009 Author Report Posted November 10, 2009 Droped the sub in... the baffle... Just need to assemble the box... glue, seal, paint... figure out how to get it in trunk... I made a mock up using Styrofoam and it barley fit... so idk how well it will work out. 1994 Pontiac Grand Prix build
kanes_disciple Posted November 11, 2009 Report Posted November 11, 2009 Nice looking build so far man. Keep up the good work! Kenwood Excelon KDX-693 Head Unit Kinetik HC600 Powerbass 6.75's in front doors Powerbass 6.75's in rear deck Powerbass 1000.1D Powerbass 400.4 2 SA-12 inch Sundown Audio Subs 0 gauge Power Wire and Big 3 Custom Amp Rack Code Alarm with remote start Stinger Digital Volt Meter My build log http://www.stevemeadedesigns.com/board/topic/51869-1996-chevy-blazer-build/ My youtube channel http://www.youtube.com/user/kanesdisciple
Carnag3 Posted November 11, 2009 Report Posted November 11, 2009 Looks awesome so far. I like to see people using ordinary tools for box builds, shows what us "little guys" can do. 2000 Blazer 4dr -24" Boss 330s -Lowered 2/3 -5000k Hids w Projector Retro -Candy tails -LED interior lighting -20% tint 35% windshield -Alpine 9886 HU -RF P1462 Dash -RF P1652 Front -RF P1652 Rear -Two 18" Fi BTLs -MB Quart Onyx 4.80 -Two Audioque AQ2200Ds -Xs Powerr D5100, 2 Powersafe G31s -Knukoncepts 1/0 wire -Mechman 270 Alt w Boost Module -10.4 Net @ 28hz 140sq.inch of port My Youtube Channel!!
white4d96 Posted November 11, 2009 Report Posted November 11, 2009 Nice! I got a '96 sedan. WHat I did was went to the local BestBuy (I know, GAG) and bought a Fosgate GM side post adapter. It replaces the terminal bolt and it is threaded on the inside so you can run amp wire off of it. A plus of it IMO is that you can cut amp power without disconnecting the battery: just undo the inner bolt (that goes into the terminal) and take the amp wires off. I gots more questions for ya about your coupe but I'll just PM them to ya. Too many projects, too little time...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.