MOUZEBINN Posted December 23, 2009 Report Share Posted December 23, 2009 This was my old setup: Yes when you're done laughing you will now realize why I'm upgrading lol what I've done since that video: 2 x Infinity Reference 6x9's 2 x Infinity Reference 6x5's 5 Gauge Power Cable as opposed to my 8 Big III I'm going to start posting videos and images of my new upgrade that's going to span over a month should be complete by january my plans for this build are going to start off with a single 15" Fi SSD Copper Coils D1 with a single ported box tuned. I'm also going to be doing some heavy modding to my car making me capible of walling off my rear car eventually by january I'm going to have a Hifonics 1600RMS @ 1 OHM and two of the SSD 15's. Now I realize I'm not running BTL's or anything special but this is a big project for me that i'd like to share... Note i'm going from two Kicker COMP 15's in a sealed box with a single amplifier to two 15 FI SSD with a 1600RMS expect pictures for the initial setup next week so keep posted for updates, also I'm going to be doing all of this in a Pontiac Grand Prix SE 1997. I'll also cover how I will be doing my wiring as well as taking suggestions. Quote Current Setup (pictures/videos uploaded) 1997 Grand Prix Se 3.8 V6 (220HP stock) 105A Alternator Big III 5/8 Gauge Wiring 1 x Alpine MRP-450.1 (1x450RMS @ 2OHM) 1 x Alpine MRP-500.2 (2x250RMS @ 4OHM) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) 1 x Pioneer dEH-11 1 x 3.5cu .75MDF tuned @ 33hz (VENTED) 2 x Kicker COMP 15" S4 Coming Soon! (pictures/videos included) 1997 Grand Prix SE with rear seat removed 225A Iraggi Alternator Big III Rear Deep Cycle 0/1 Gauge Wiring 1 x Alpine MRP-500 1 x Alpine MRP-450 1 x Alpine CDA-9885 60x4 RMS 1 x Hifonics Brutus 1605D (1600RMS x 1 @ 1 OHM) 2 x Fi SSD 15" Copper Coil D1 1 x 5.5cu .75MDF tuned @ 33hz (VENTED) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) Link to comment Share on other sites More sharing options...
MOUZEBINN Posted December 23, 2009 Author Report Share Posted December 23, 2009 Also I know that video says its last month but it's really like 6 months go so I've had a lot of time to rethink my system... Also anyone with a grand prix that doesnt have a fold down seat that has any ideas how to maximize air flow in the car without sacraficing my rear seat my ears are open! Quote Current Setup (pictures/videos uploaded) 1997 Grand Prix Se 3.8 V6 (220HP stock) 105A Alternator Big III 5/8 Gauge Wiring 1 x Alpine MRP-450.1 (1x450RMS @ 2OHM) 1 x Alpine MRP-500.2 (2x250RMS @ 4OHM) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) 1 x Pioneer dEH-11 1 x 3.5cu .75MDF tuned @ 33hz (VENTED) 2 x Kicker COMP 15" S4 Coming Soon! (pictures/videos included) 1997 Grand Prix SE with rear seat removed 225A Iraggi Alternator Big III Rear Deep Cycle 0/1 Gauge Wiring 1 x Alpine MRP-500 1 x Alpine MRP-450 1 x Alpine CDA-9885 60x4 RMS 1 x Hifonics Brutus 1605D (1600RMS x 1 @ 1 OHM) 2 x Fi SSD 15" Copper Coil D1 1 x 5.5cu .75MDF tuned @ 33hz (VENTED) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) Link to comment Share on other sites More sharing options...
BEllithorpe04 Posted December 24, 2009 Report Share Posted December 24, 2009 well my 97 bonneville has the center thing that folds down and a removeable divider, does yours have that and have you done it? Quote 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build Link to comment Share on other sites More sharing options...
MOUZEBINN Posted December 24, 2009 Author Report Share Posted December 24, 2009 Nope, its a straight wall you have to basically remove the seat to get access to the trunk, thats why I was thinking of putting 3 4" ports Quote Current Setup (pictures/videos uploaded) 1997 Grand Prix Se 3.8 V6 (220HP stock) 105A Alternator Big III 5/8 Gauge Wiring 1 x Alpine MRP-450.1 (1x450RMS @ 2OHM) 1 x Alpine MRP-500.2 (2x250RMS @ 4OHM) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) 1 x Pioneer dEH-11 1 x 3.5cu .75MDF tuned @ 33hz (VENTED) 2 x Kicker COMP 15" S4 Coming Soon! (pictures/videos included) 1997 Grand Prix SE with rear seat removed 225A Iraggi Alternator Big III Rear Deep Cycle 0/1 Gauge Wiring 1 x Alpine MRP-500 1 x Alpine MRP-450 1 x Alpine CDA-9885 60x4 RMS 1 x Hifonics Brutus 1605D (1600RMS x 1 @ 1 OHM) 2 x Fi SSD 15" Copper Coil D1 1 x 5.5cu .75MDF tuned @ 33hz (VENTED) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) Link to comment Share on other sites More sharing options...
BEllithorpe04 Posted December 24, 2009 Report Share Posted December 24, 2009 port it through the deck, it will get much louder that way with the bounce off of the rear glass Quote 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build Link to comment Share on other sites More sharing options...
MOUZEBINN Posted December 24, 2009 Author Report Share Posted December 24, 2009 port it through the deck, it will get much louder that way with the bounce off of the rear glass That's what I wanted to hear, thing 3 4" ports would be adequate? Quote Current Setup (pictures/videos uploaded) 1997 Grand Prix Se 3.8 V6 (220HP stock) 105A Alternator Big III 5/8 Gauge Wiring 1 x Alpine MRP-450.1 (1x450RMS @ 2OHM) 1 x Alpine MRP-500.2 (2x250RMS @ 4OHM) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) 1 x Pioneer dEH-11 1 x 3.5cu .75MDF tuned @ 33hz (VENTED) 2 x Kicker COMP 15" S4 Coming Soon! (pictures/videos included) 1997 Grand Prix SE with rear seat removed 225A Iraggi Alternator Big III Rear Deep Cycle 0/1 Gauge Wiring 1 x Alpine MRP-500 1 x Alpine MRP-450 1 x Alpine CDA-9885 60x4 RMS 1 x Hifonics Brutus 1605D (1600RMS x 1 @ 1 OHM) 2 x Fi SSD 15" Copper Coil D1 1 x 5.5cu .75MDF tuned @ 33hz (VENTED) 2 x 6 1/2 Infinity Reference 3-WAY (250RMS) 2 x 6 by 9 Infinity Reference 3-WAY (300RMS) Link to comment Share on other sites More sharing options...
Alexdb7 Posted December 24, 2009 Report Share Posted December 24, 2009 (edited) That's what I wanted to hear, thing 3 4" ports would be adequate? at least...what are the box specs? your sig confuses me lol Edited December 24, 2009 by Alexdb7 Quote Custom Car Audio (815) 916 - 9194 www.midwestsplcustoms.com 2000 Tahoe | 22" GREED Celebrities Alpine CDA-117 Dual 0/1 Runs (3) 925 CA Group 31 In Back (4) 18" FI Audio Q's (W/ Extra Spider) (4) Hifonics BXi 2010D Hifonics ZXi 4410 4 RF P1653 6 1/2's Big 3 All Kicker/Knu Wiring Link to comment Share on other sites More sharing options...
Maxim Posted December 24, 2009 Report Share Posted December 24, 2009 Waddup Quicksilver? Quote wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
treossi Posted December 24, 2009 Report Share Posted December 24, 2009 awesome wheres the pics Quote Team sundownWESTCOASTSPL.COM we're throwing dbdrag events very soon visit the website for details Link to comment Share on other sites More sharing options...
CAKEWALK Posted December 24, 2009 Report Share Posted December 24, 2009 (edited) Haha, the whole Quick Silva thing is my friend wanted me to make a video so I said that as a holla, it was like 7 AM and I was tired as hell, didn\'t sleep that night decided I\'d do a demo, big mestake.... Anyways, be patient guys I\'m just starting to gather supplies, and as far as the 4\" ports I\'m talking about putting them in my rear deck panel for airflow from trunk to interior, of course my box is going to be vented... I\'m running a shitty single 33hz tuned box right now I\'ll make videos of the single sub setup off 400RMS is friggin slaps... VIDEO OF OPENING (Hear the excitment, again this was at like 4AM tonight LOL) - Also how do people embed their youtube videos in the topic post??? Edited December 24, 2009 by CAKEWALK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.