bumpmasterflex Posted February 15, 2010 Report Share Posted February 15, 2010 my enclosure is 7 cubes and going to be tuned at 34 htz. how to i build the port to tune it to this frequency? i understand how to use the calculators but what exactly is port length and how to i build the port. its going to share one of the box walls on the bottom and its horizontal. sub up, port back Dc level 4 18 ported box 6 cubes tuned to 34 htz 1.5 cubic ft. port area Big 3 done on 0 gauge knukonceptz wiring throughout kinetik in back AQ 2200d Link to comment Share on other sites More sharing options...
Neo_frog Posted February 15, 2010 Report Share Posted February 15, 2010 Port length is the measurement from the entrance to the exit of the port assuming you have consistent port area throughout the measurement. Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/ Link to comment Share on other sites More sharing options...
bumpmasterflex Posted February 15, 2010 Author Report Share Posted February 15, 2010 so if i have a port length of 27 inches thats going to be the piece of wood across from the side wall of my box which is part of the port? Dc level 4 18 ported box 6 cubes tuned to 34 htz 1.5 cubic ft. port area Big 3 done on 0 gauge knukonceptz wiring throughout kinetik in back AQ 2200d Link to comment Share on other sites More sharing options...
hk-renob Posted February 15, 2010 Report Share Posted February 15, 2010 my advise look at some premade boxes to get an idea. a picture is worth a thousand words. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.