Check list for my next enclosure...help me out

[Ernesto]

Anybody with Bassbox Pro or a similar reliable program that wants to calculate some plans for me using square ports let me know. P/M me or post here

[TechSys]

I would but for some reason my BBP6 decided to be a pain. I'll go to full screen and it'll crash with a memory error.

WinISD is doing the same thing. Probably going to go ahead and reinstall XP again.

I do have one for a 29.217 ft^3 enclosure tuned to 31.2Hz, but it's probably far too big for your application. It's 58" wide x 48" high x 35" deep using 1.5" walls, with a port 45" high x 15" wide x 18.5" long.

That is one that I'm working on for the Astro and 4 18" BTLs. Not sure how it'll do though.

[Ernesto]

I would but for some reason my BBP6 decided to be a pain. I'll go to full screen and it'll crash with a memory error.

WinISD is doing the same thing. Probably going to go ahead and reinstall XP again.

I do have one for a 29.217 ft^3 enclosure tuned to 31.2Hz, but it's probably far too big for your application. It's 58" wide x 48" high x 35" deep using 1.5" walls, with a port 45" high x 15" wide x 18.5" long.

That is one that I'm working on for the Astro and 4 18" BTLs. Not sure how it'll do though.

LOL yeah a little too big for me...I can only fit 49" max and I don't want to do a wall.

[AP Zoutes]

You don't like the enclsure plans I came up with?  Oh, Well.....

[Ernesto]

You don't like the enclsure plans I came up with?  Oh, Well.....

Never said that! What im asking for is a display to show it to my partner that is going to assist me. Some thing like I posted for the bracing with a cutout sheet.

[Ernesto]

Hoping that the cash comes thru fast enough $$$ So I can take this setup out to Hot Import Nights Dec 16 and show them a little bit of FI Audio :^

[Ernesto]

Im looking if possible  for some one to draw some thing like this with a cutout list

Or some thing more plain with a nice cutout list...This is what I got so far...

[Ernesto]

Drew this up using paint :^ I'm going to go ahead and use 2x4s for bracing.

Take a look and tell me if you think I should be ok with where I decided to place 2x4s

[Ernesto]

I'm looking at making the port about

18.5"H

12" W

That would give me about 222sqin of port. Now I just need a little help figuring out how long to make it to get my tunning :-

[AP Zoutes]

your subs take up 1.04 ft3 right? your bracing will take 1ft (keep adding until it gets to 1 ft3 then stop) 21.6 minus subs and brace = 19.56 port will take about 2 ft3 = 17.56. PORT LENGTH = 15.5" = 34.93hz