Sactownbully84 Posted February 18, 2010 Report Posted February 18, 2010 hey i have a SS xxx4000d running .7 ohms on a LOADED BTL and i was wondering if i have enough electrical to back it up...i have a DC 260SP on its way and 2 SPV70 batts in the truck with my big 3 in monster 400 1/0 with my batts grounded to the frame in back and amp grounded to frame in back with a single run of 1/0 monster 400 as my charge wire. i have a stock battery up front and i was just wanting sum input if this would be enough or what i should add thanks..... ps i have my charge wire fused under hood w a 300 amp...and a fuse b4 my amp a 250. also the amp is rated by SS to pull 280amp 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL
sactownstang Posted February 18, 2010 Report Posted February 18, 2010 Sounds like u got it all in check for that power, monitor voltage when it all gets hooked up. I think your fine but that will be the determine factor on if its enough...
Sactownbully84 Posted February 18, 2010 Author Report Posted February 18, 2010 Sounds like u got it all in check for that power, monitor voltage when it all gets hooked up. I think your fine but that will be the determine factor on if its enough... awesome thanks i thought i would be ok also at the most cuz i like nothin but rap and nasty bass tracks i might need one more SPV70 but imma wait till i install ALT till i order another batt thanks 4 the input tho 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL
splzx3 Posted February 18, 2010 Report Posted February 18, 2010 dose ur wire have that dumb ass plastic thing in the middle? ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum.
Sactownbully84 Posted February 18, 2010 Author Report Posted February 18, 2010 dose ur wire have that dumb ass plastic thing in the middle? yeah monster says its a magnetic tube to help with current transfer or sumthin like that i had to get 2/0 lugs to solder cuz it makes it too big it still barely fit in the 2/0 2001 Grand AM Pioneer UB4000 HU Tsunami / Monster Wire's DC POWER INC 260SP ALT w/ XS Power VCM BIG 3 All 1/0 Monster 400 + YT Under Hood Stinger SPV70 x2 in Trunk 4x SA-10's On There Way soon i hope SS XXX-4000D @ .7ohm 3K+ RF Power 4x6's & 6x9's Monsoon Powered PG TL22 Line Driver 148.7db @ 35-45hz sweep w/ 12" BTL
Recommended Posts
Archived
This topic is now archived and is closed to further replies.