thumpintundra Posted February 22, 2010 Report Share Posted February 22, 2010 ok guys so a buddy of mine wants me to help him build a box for his infinity sub since i'm better at building stuff and whatnot. anyways the plan is to build a box to go under the driverside rear seat...i want to port this box, but i don't know how to measure out all the things such as HZ, port length, port volume, etc. i want to slot port it as well so any advice from you seasoned box builders would be greatly appreciated..also where to locate the port would be helpful too! Link to comment Share on other sites More sharing options...
Steph3n1 Posted February 22, 2010 Report Share Posted February 22, 2010 ok guys so a buddy of mine wants me to help him build a box for his infinity sub since i'm better at building stuff and whatnot. anyways the plan is to build a box to go under the driverside rear seat...i want to port this box, but i don't know how to measure out all the things such as HZ, port length, port volume, etc. i want to slot port it as well so any advice from you seasoned box builders would be greatly appreciated..also where to locate the port would be helpful too! max dims? itll be tough to fit ANY sub under the front seat of a car in a ported box.? what size is the woofer? how do you want it to sound? 2005 Ford Ranger Reg cab Build in Progress T3 Audio T2000 12 ARC SE4000 Stinger HPM 1/0 Wire DC power 270xp Batts: 1 Redtop up front and a Stinger SPP2250 in the back Hopes to be in and around a 150....weel see my youtube channel http://www.youtube.com/user/steph3n1 Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
thumpintundra Posted February 22, 2010 Author Report Share Posted February 22, 2010 nah man sorry i meant the driver side rear seat...i want it to bump pretty good...it's a 10" i know i can get it under there and suprisingly the sub only calls for 1 cube for a ported box and i know i can get a cube under there easily...i was just curious about how to build ported boxes in general ya know what i mean? Link to comment Share on other sites More sharing options...
thumpintundra Posted February 23, 2010 Author Report Share Posted February 23, 2010 bump it to the top! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.