how to fix

[ARMYSGT_D]

still pops ray should ill try a pop stopper device

Edited March 5, 2010 by ARMYSGT_D

[Guest Scylloga]

Im having the same issue with my pioneer deh p7100bt and rf power 1000. That shit pops on power up and power down.

[dwright27]

i changed decks and this stopped.

[Colin - STAPUFT]

Your amp is coming on and powering up before your HU puts out any output through your RCAs. Amp is already on and then your HU puts out signal and POP!

Either replace the HU or get or make a delay device that makes your HU come on and gives your amps a few seconds of delay. Then the pop will stop.

I had this problem as well. Also- Different types of amps come on and go off at different times. Really annoying. I use 2 really really old MTX LSB-1 bass processors with turn on/off delay to fix it.

[ARMYSGT_D]

Your amp is coming on and powering up before your HU puts out any output through your RCAs. Amp is already on and then your HU puts out signal and POP!

Either replace the HU or get or make a delay device that makes your HU come on and gives your amps a few seconds of delay. Then the pop will stop.

I had this problem as well. Also- Different types of amps come on and go off at different times. Really annoying. I use 2 really really old MTX LSB-1 bass processors with turn on/off delay to fix it.

thanks for breaking it down ill go ahead and get the stinger pop stopper or do u have a link to a better 1

[ARMYSGT_D]

i got all my remotes on an on off switch running off a relay even if i cut it on after the hu is loaded and playing it still pops

[Guest Scylloga]

Your amp is coming on and powering up before your HU puts out any output through your RCAs. Amp is already on and then your HU puts out signal and POP!

Either replace the HU or get or make a delay device that makes your HU come on and gives your amps a few seconds of delay. Then the pop will stop.

I had this problem as well. Also- Different types of amps come on and go off at different times. Really annoying. I use 2 really really old MTX LSB-1 bass processors with turn on/off delay to fix it.

What causing the pop when I shut it off?

And could you link me to somewhere that shows how to rectify this?

[Blackedout]

What causing the pop when I shut it off?

And could you link me to somewhere that shows how to rectify this?

Headunit turning off before the amp does. The stinger Pop stopper also puts a delay on that.

[ARMYSGT_D]

i just ordered me a stinger pop stopper we'll see if that works

[Boon]

How many poles on your switch? If it's a switch that needs to be grounded and you didn't that'll make it go pop. Biggest case in point is illuminating switches, if you don't attach the ground for the light (because you don't want it to light up) you will get pops.