cvxsmitty58 Posted March 9, 2010 Report Share Posted March 9, 2010 So ive already built my box but i wanna make sure that im atleast in the ballpark of what i want. The box is 8.65cuft before displacements. I calculated the displacements be about .8cuft so leaving me right around 7.5 cuft. including the port. The port volume is .65 cuft. I want a tuning around 34 so i went with a port 20 inches wide 4 inches high and 15 inches deep. I'd rather be off low but for some reason i think im getting close to 35. If i have to cut the port id like to do it now before i put the baffle on. So basically..... Box Volume including port- 7.5 cuft Box Volume Not including Port- 6.85 cuft Port Width- 20 inches Port Height- 4 Inches Port Lenght- 15 Inches Desired Frequency- 34 Hz Thanks Guys Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.