Symmetry9898 Posted March 15, 2010 Report Posted March 15, 2010 I bought the knukoncepts KLMX 0/1 cable for my install. Charging with a 300a Iraggi. I am going to be running a T20001bd and a T4004 off of this cable, is that going to be sufficient? I have read that the KLMX cable will hold 3k rms. Just needing some input. Quote Build in progress: Kenwood DNX890HD Rockford Fosgate White wolf RCA's 2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)2 Rockford Fosgate T2500's on sub 1 Fi car audio Team 15 D1 XS Power D3400 and three D975's in the rear Mechman Elite 370 Stinger power connections and cable
Slappin F150 Posted March 15, 2010 Report Posted March 15, 2010 Personally...Id run some 4 or 8 gauge to your 4 channel. But thats just me. Keep in mind your t2000 probably does close to 2500 maybe and your 4 channel will do 500ish. And its not about RMS it can handle . Its amperage . Quote Team DC! 2005 F150 | Pioneer | Infinity Kappa 6x8's | MTX 3404 4 Channel | Q Logic Kicks | KNU | DC | AQ | 1998 Taurus | Alpine | Punch 5x7's | Rockford Fosgate | MTX | KNU |
Symmetry9898 Posted March 15, 2010 Author Report Posted March 15, 2010 Personally...Id run some 4 or 8 gauge to your 4 channel. But thats just me. Keep in mind your t2000 probably does close to 2500 maybe and your 4 channel will do 500ish. And its not about RMS it can handle . Its amperage . Yeah, i seen that it was good for about 250 amps. But that is what my T20001 is fused at. Am i going to be good with this wire? Quote Build in progress: Kenwood DNX890HD Rockford Fosgate White wolf RCA's 2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)2 Rockford Fosgate T2500's on sub 1 Fi car audio Team 15 D1 XS Power D3400 and three D975's in the rear Mechman Elite 370 Stinger power connections and cable
Neo_frog Posted March 15, 2010 Report Posted March 15, 2010 It never hurts to run another. Quote Need an install? Hit me up.[email protected]Got car audio questions? Check here first!Everything you need to know. =]http://www.stevemeadedesigns.com/board/topic/83029-everything-you-need-to-know/
Guest Scylloga Posted March 15, 2010 Report Posted March 15, 2010 Yeah, i seen that it was good for about 250 amps. But that is what my T20001 is fused at. Am i going to be good with this wire? As stated above if your worried just grab some kno 8 ga for the 4 chan. Quote
Slappin F150 Posted March 15, 2010 Report Posted March 15, 2010 I am in the same boat. 320A alt. same wire. 5 amps, 4 batteries. 560amp draw total in the system. Im tuned in to what people say You need more wire son. Unless you like smoke. Quote Team DC! 2005 F150 | Pioneer | Infinity Kappa 6x8's | MTX 3404 4 Channel | Q Logic Kicks | KNU | DC | AQ | 1998 Taurus | Alpine | Punch 5x7's | Rockford Fosgate | MTX | KNU |
tlee2 Posted March 15, 2010 Report Posted March 15, 2010 (edited) I personally think youll be fine. Just add another run if it paranoids you. I have the same wire EDIT: and im assuming you already have a few runs with 5 amps and the batts(my bad wrong person haha) Edited March 15, 2010 by tlee2 Quote 6 Sundown X 15s 2 Sundown NS1 V2s C Pillar 4th order Bagged Suburban on 24s http://youtube.com/tlee333
Symmetry9898 Posted March 15, 2010 Author Report Posted March 15, 2010 Slappin, your pic in the info block is the shit LOL Quote Build in progress: Kenwood DNX890HD Rockford Fosgate White wolf RCA's 2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)2 Rockford Fosgate T2500's on sub 1 Fi car audio Team 15 D1 XS Power D3400 and three D975's in the rear Mechman Elite 370 Stinger power connections and cable
Symmetry9898 Posted March 15, 2010 Author Report Posted March 15, 2010 worst case i think i would just do like the fella earlier said, just run some 4 or 8 to the 4channel Quote Build in progress: Kenwood DNX890HD Rockford Fosgate White wolf RCA's 2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)2 Rockford Fosgate T2500's on sub 1 Fi car audio Team 15 D1 XS Power D3400 and three D975's in the rear Mechman Elite 370 Stinger power connections and cable
Symmetry9898 Posted March 15, 2010 Author Report Posted March 15, 2010 just our of curiosity, how many amps do you guys think the T20001 will pull playing music? 175-180 maybe? im just curious. Quote Build in progress: Kenwood DNX890HD Rockford Fosgate White wolf RCA's 2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)2 Rockford Fosgate T2500's on sub 1 Fi car audio Team 15 D1 XS Power D3400 and three D975's in the rear Mechman Elite 370 Stinger power connections and cable
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.