Loudest behind seat setup

[Ray]

old body style 07? (classic)????

if its new body, the box goes under the seat

if it's old body a btl will never fit.

you can get 2.2 before if built right.

I usually do 2 1008's vented back there.

ive seen a 136 @ 39hz before on 1000w

[JBurt09]

old body style 07? (classic)????

if its new body, the box goes under the seat

if it's old body a btl will never fit.

you can get 2.2 before if built right.

I usually do 2 1008's vented back there.

ive seen a 136 @ 39hz before on 1000w

I was hoping you or Mike Hughes would pitch in on this. It's the old body style, box behind the seat. The 1008s are what I have on the way. Steve and I went over a number of different designs for back there, but he was really stressing using aero-ports.I usually just do a slot port back there, but what do you recommend?Why kind of design or setup?

Also Steve said if put in the right box and tuned right you can give those 500 RMS each all day long, so I plan on running a solid 1000 watts RMS to them.

[Ray]

the box stops short from the pass side c-pillar about 5"

6" aero port firing towards the pass c-pillar.

tune to 40-42hz

it will slam, and get with it on the lowz

[JBurt09]

the box stops short from the pass side c-pillar about 5"

6" aero port firing towards the pass c-pillar.

tune to 40-42hz

it will slam, and get with it on the lowz

So instead of going the full 55-55.5" you only go about 50"?Still 14" tall I assume?And where do you pick your aeros up from?PartsExpress?I've never really done a whole lot with aeros before.

You got any pics of any previous builds of these that you have done that you may be able to email me when you get a chance for reference?I'm pretty stoked about this little build, and I appreciate your feedback.

Edited March 24, 2010 by JBurt09

[Ray]

i make my own areo's

parts express has 4"

no pics sorry.

[JBurt09]

Finally got some product in for this build