siviog1 Posted April 5, 2010 Report Share Posted April 5, 2010 Hey guys I decided to run (2) B&C 6PEV13 6.5 Mids and (2) B&C DE35 Bullet Tweeter in each front door. I plan on purchasing a active Headunit to tune the system. Can anyone tell me what range or xo point I should run to these speakers? Also I need to purchase an amp for these speakers would someone please recommend an amp as well to power this. Thanks B&C 6PEV13 SPECS Nominal Diameter 170 mm (6.5 in.) Nominal Impedance 8 Ω Minumum Impedance 6 Ω Power Handling (300-3000 Hz) Nominal1 120 W Continuous Program2 240 W Sensitivity (1W/1m)3 99 dB Frequency Range 150-8000 Hz Voice Coil Diameter 38 mm (1.5 in) Winding Material Aluminium Former Material Fiber Glass Winding Depth 7 mm (9/32 in) Magnetic Gap Depth 6 mm (1/4 in) Flux Density 1.4 T Thiele & Small Parameters4 Fs 126 Hz Re 5.2 Ω Qes 0.39 Qms 4.6 Qts 0.36 Vas 6 dm3 (0.21 ft3) Sd 132 cm2 (20.5 in2) η0 3% X max ± 0.6 mm X var ± 1.5 mm Mms 6 g Bl 8.2 T·m Le 0.6 mH B&C DE35 SPECS Nominal Impedance 8 ohm Minimum Impedance 7 ohm Nominal Power Handling (1) 25 W Continuous Power Handling (2) 50 W Sensitivity (1W/1m) (3) 108 dB Frequency Range 3.5 -18 kHz Recommended Crossover (4) 5 kHz Voice Coil Diameter 32 mm (1.25 in) Winding Material Aluminium Inductance 0.1 mH Diaphragm Material Mylar Flux Density 1.3 T Quote Link to comment Share on other sites More sharing options...
bmwsittinon19s Posted June 7, 2010 Report Share Posted June 7, 2010 Hey guys I decided to run (2) B&C 6PEV13 6.5 Mids and (2) B&C DE35 Bullet Tweeter in each front door. I plan on purchasing a active Headunit to tune the system. Can anyone tell me what range or xo point I should run to these speakers? Also I need to purchase an amp for these speakers would someone please recommend an amp as well to power this. Thanks B&C 6PEV13 SPECS Nominal Diameter 170 mm (6.5 in.) Nominal Impedance 8 Ω Minumum Impedance 6 Ω Power Handling (300-3000 Hz) Nominal1 120 W Continuous Program2 240 W Sensitivity (1W/1m)3 99 dB Frequency Range 150-8000 Hz Voice Coil Diameter 38 mm (1.5 in) Winding Material Aluminium Former Material Fiber Glass Winding Depth 7 mm (9/32 in) Magnetic Gap Depth 6 mm (1/4 in) Flux Density 1.4 T Thiele & Small Parameters4 Fs 126 Hz Re 5.2 Ω Qes 0.39 Qms 4.6 Qts 0.36 Vas 6 dm3 (0.21 ft3) Sd 132 cm2 (20.5 in2) η0 3% X max ± 0.6 mm X var ± 1.5 mm Mms 6 g Bl 8.2 T·m Le 0.6 mH B&C DE35 SPECS Nominal Impedance 8 ohm Minimum Impedance 7 ohm Nominal Power Handling (1) 25 W Continuous Power Handling (2) 50 W Sensitivity (1W/1m) (3) 108 dB Frequency Range 3.5 -18 kHz Recommended Crossover (4) 5 kHz Voice Coil Diameter 32 mm (1.25 in) Winding Material Aluminium Inductance 0.1 mH Diaphragm Material Mylar Flux Density 1.3 T Id go with somthing quality for a amp iv always had good luck with Old school rockfords and eclipse is a decent amp depending on your budget for a little cheaper the new hifonics amps are ok go with sumthing 400X2 or 600X2 run your 6.5 and horn togather + to + and - to - soo it will run at 4 ohms u can even run another horn in there or another 8 ohm speaker to drop it to 2 ohms... but a decent crossover for the horns!! u can check with parts express tech support n they will recomend one for u Quote Link to comment Share on other sites More sharing options...
ptcary Posted June 13, 2010 Report Share Posted June 13, 2010 Keep in mind that you get a higher crossover point when running 8-ohm components from a 4-ohm crossover. Quote PTCary 2003 SMD PT Cruiser 2011 Honda CBR 250R 2010 Mazda 3i Sport MY BUILD LOG Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.