Using A sub amp RCA Pass Thru ?

[LilTeddyP]

RFITY-1F

2 of them

one for left and one for right, problem is, will it be long enough to reach both amps

[Crump]

RFITY-1F

2 of them

one for left and one for right, problem is, will it be long enough to reach both amps

well off of the splitter cant I just run an Rca to my amp?

[LilTeddyP]

Then you would need 2 sets of these

http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=96&item_id=108346&locale=en_US&p_status=

with 2 of these

http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=64&item_id=109335&locale=en_US&p_status=

and 2 sets of rcas

OR

1 set of these

http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=96&item_id=108346&locale=en_US&p_status=

2 of these

http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=64&item_id=109334&locale=en_US&p_status=

and 2 sets of RCAs

[LilTeddyP]

im being complicated and i apologize, im tired, just trying to give you the options

[LilTeddyP]

Why are you running another amp for your tweeters, not just cut in to your front speakers?

[Crump]

Why are you running another amp for your tweeters, not just cut in to your front speakers?

Well I was thinking about running my two rear channels @ 2 ohms each. 1 for my 4 tweets (2 per crossover) and 1 for my two rear speakers.

the tweets are going in the rear deck

[LilTeddyP]

If it were me I would just tap into the speakers that are already there. No need for another amp imo, maybe someone else will have a different opinion but as long as the tweets can handle the power... What are the tweets, is it a component set of speakers or just tweets you are adding on

[LilTeddyP]

also if they are going in the rear i would use the rear rcas if you are still bi amping

[Crump]

If it were me I would just tap into the speakers that are already there. No need for another amp imo, maybe someone else will have a different opinion but as long as the tweets can handle the power... What are the tweets, is it a component set of speakers or just tweets you are adding on

Heres my options

1. 4 tweeters take up 2 channels get 50 watts each 4 door speakers get 50 watts each

2. 4 tweeters take up one channel and get 25 watts per channel, 2 rear speakers get 50 watts each, 2 fronts get regular wattage

and they are tweeters from my old component system. but Im just not using the speaker

these

[LilTeddyP]

as far as i have ever heard, not stating fact here, but i have heard that tweeters dont really mess with impedance and take away from power. what do you have for fronts? if you have the fronts covered, then I would just hook both sets of tweets to the one cross with the woofer on the other side and forget the other amp but im going to bed, ill check back tomorrow and maybe agreed with or told im wrong, we shall see