LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 RFITY-1F 2 of them one for left and one for right, problem is, will it be long enough to reach both amps 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 RFITY-1F 2 of them one for left and one for right, problem is, will it be long enough to reach both amps well off of the splitter cant I just run an Rca to my amp? Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 Then you would need 2 sets of these http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=96&item_id=108346&locale=en_US&p_status= with 2 of these http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=64&item_id=109335&locale=en_US&p_status= and 2 sets of rcas OR 1 set of these http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=96&item_id=108346&locale=en_US&p_status= 2 of these http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=64&item_id=109334&locale=en_US&p_status= and 2 sets of RCAs 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 im being complicated and i apologize, im tired, just trying to give you the options 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 Why are you running another amp for your tweeters, not just cut in to your front speakers? 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 Why are you running another amp for your tweeters, not just cut in to your front speakers? Well I was thinking about running my two rear channels @ 2 ohms each. 1 for my 4 tweets (2 per crossover) and 1 for my two rear speakers. the tweets are going in the rear deck Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 If it were me I would just tap into the speakers that are already there. No need for another amp imo, maybe someone else will have a different opinion but as long as the tweets can handle the power... What are the tweets, is it a component set of speakers or just tweets you are adding on 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 also if they are going in the rear i would use the rear rcas if you are still bi amping 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
Crump Posted April 11, 2010 Author Report Share Posted April 11, 2010 If it were me I would just tap into the speakers that are already there. No need for another amp imo, maybe someone else will have a different opinion but as long as the tweets can handle the power... What are the tweets, is it a component set of speakers or just tweets you are adding on Heres my options 1. 4 tweeters take up 2 channels get 50 watts each 4 door speakers get 50 watts each 2. 4 tweeters take up one channel and get 25 watts per channel, 2 rear speakers get 50 watts each, 2 fronts get regular wattage and they are tweeters from my old component system. but Im just not using the speaker these Team gg Team doa Installs I have doneMy 2010 Rebuild 144 db so far....2 DC xl 10s Firing into cabin on a RF 25002 12" AQ HD's powered by a Saz 2k + Lots o Mids+Highs Link to comment Share on other sites More sharing options...
LilTeddyP Posted April 11, 2010 Report Share Posted April 11, 2010 as far as i have ever heard, not stating fact here, but i have heard that tweeters dont really mess with impedance and take away from power. what do you have for fronts? if you have the fronts covered, then I would just hook both sets of tweets to the one cross with the woofer on the other side and forget the other amp but im going to bed, ill check back tomorrow and maybe agreed with or told im wrong, we shall see 2001 Bravada (2wd) Pewter on 24's JVC KW-AV60BT 10 Alpine Type-S 6.5s 2 PSI/BTL 18's @ 32Hz 2 Rockford Fosgate T25001-bd's @ 1-ohm each Rockford Fosgate T1000-4 Rockford Fosgate T400-4 Rockford 3Sixty.2 Yellow top up front, 2 9a31s in the back LOTS of AT 1/0 Python 991 350 Amp Singer Alt "Build Log" My Facebook My YouTube i didnt see the video or read anything but...cool story and the reason your being a cock tonight is? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.