jjj_88 Posted June 13, 2010 Report Posted June 13, 2010 ok so i got an orion hcca 12.2 wired down to 1 ohm on a hifonics 2600 rms amp and it blew on me the other day its only 6 months old why would it do that? and also im looking at buying a fi btl 18 what is a really good amp to put on it within the 500$ range sorry new to this forum also
Freshman6969 Posted June 13, 2010 Report Posted June 13, 2010 i dont think that amp is 1 ohm stable? i may be wrong Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
jjj_88 Posted June 13, 2010 Author Report Posted June 13, 2010 yeah its 1 ohm stable but i just dont get why it would have fried the voice coil on the sub is completly burnt
Freshman6969 Posted June 13, 2010 Report Posted June 13, 2010 well could be your gains, most likly Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
jjj_88 Posted June 13, 2010 Author Report Posted June 13, 2010 i mean i wont lie the gain was completly turned up on the amp but they say that sub can handle hella power so i figured i would try it lol
Freshman6969 Posted June 13, 2010 Report Posted June 13, 2010 .......thats why it blew, no matter how good the sub is never EVER EVER turn your gain up all the way, as you can see it fries your coils Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
jjj_88 Posted June 13, 2010 Author Report Posted June 13, 2010 it jus didnt seem loud enough for all the talk about these subs it jus didnt seem loud enough thats why i turned it completly all the way up
Freshman6969 Posted June 13, 2010 Report Posted June 13, 2010 the gain is NOT a volume knob, what kinda box did you have and what were the specs, did you even bother to set your eq's? Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog
hdorre Posted June 13, 2010 Report Posted June 13, 2010 i mean i wont lie the gain was completly turned up on the amp but they say that sub can handle hella power so i figured i would try it lol this sub can handle power, clean power. You were clipping the shit out of the sub (giving it an extremely dirty signal) On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
jjj_88 Posted June 13, 2010 Author Report Posted June 13, 2010 specs on the box were 3 cubic ft with staggered port 32 hz the eq's were all set
Recommended Posts
Archived
This topic is now archived and is closed to further replies.