Jump to content

Recommended Posts

Yeah bro your truck sounded really good even though I found out you were only using half of each amp and shit was clipping. As far as your wiring goes, you can just move your negative wire down to the other negative spot and you should be good on that. Then just need to figure out what your gonna do with that eq and get with Hobby so you can scope it. You have a lot more to get out of this system.

TeamDeadlyHertz-PUNKYOU007.png

d(-__-)b

beer sucks...but i can bring some jose cuervo. Only problem is that it makes me horny and gives me the rams. So unless yall wanna fight and then have some great make up sex i will leave it home.

Link to comment
Share on other sites

Yeah bro your truck sounded really good even though I found out you were only using half of each amp and shit was clipping. As far as your wiring goes, you can just move your negative wire down to the other negative spot and you should be good on that. Then just need to figure out what your gonna do with that eq and get with Hobby so you can scope it. You have a lot more to get out of this system.

ya, im probably just going to sell the eq.

anyone looking for one? it works fine, amps just cant take the voltage

4 - 15 Sundown Z v.2 @ 35Hz

2 - AP3000D

2 - RF Power Punch 6.5 Comps

2 - RF Power Power

1 - Kinetic KHC2000

3 - Kinetic KHC2400

Iraggi 300A

Knu Wiring

Link to comment
Share on other sites

just another video from the TDH show on the 14th

amps are wired to half power....AP is goofy like that.

little bit more air movement at the end of the video.

4 - 15 Sundown Z v.2 @ 35Hz

2 - AP3000D

2 - RF Power Punch 6.5 Comps

2 - RF Power Power

1 - Kinetic KHC2000

3 - Kinetic KHC2400

Iraggi 300A

Knu Wiring

Link to comment
Share on other sites

Looks like its moving some air, you plan on adding more power to them later? Maybe 2k each or more.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Link to comment
Share on other sites

Looks like its moving some air, you plan on adding more power to them later? Maybe 2k each or more.

ya, they will have 1500 each come next week sometime.

4 - 15 Sundown Z v.2 @ 35Hz

2 - AP3000D

2 - RF Power Punch 6.5 Comps

2 - RF Power Power

1 - Kinetic KHC2000

3 - Kinetic KHC2400

Iraggi 300A

Knu Wiring

Link to comment
Share on other sites

Where did you order your Audiopipe's from? Thats going to be my next amp.

i got them both used on SMD in the FS section.

good deal on both of them too.

4 - 15 Sundown Z v.2 @ 35Hz

2 - AP3000D

2 - RF Power Punch 6.5 Comps

2 - RF Power Power

1 - Kinetic KHC2000

3 - Kinetic KHC2400

Iraggi 300A

Knu Wiring

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1156 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...